Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

Date: 2004-06-27 07:11:10
From: elektro-schuepp
Description: Sun Ultra-5.
NetBSD 2.0_BETA (GENERIC) #0: Fri Jun 18 19:32:00 CEST 2004
        xxx@xxx:/mnt/data2/sources/NetBSD/src/sys/arch/sparc64/compile/obj/GENERIC
total memory = 256 MB
avail memory = 240 MB
bootpath: /pci@1f,0/pci@1,1/ide@3,0/disk@0,0
mainbus0 (root): SUNW,Ultra-5_10: hostid xxxxxxxx
cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 400 MHz, version 0 FPU
cpu0: 32K instruction (32 b/l), 16K data (32 b/l), 2048K external (64 b/l)
psycho0 at mainbus0 addr 0xfffc4000
SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0
DVMA map: c0000000 to e0000000
IOTSB: 106f2000 to 10772000
pci0 at psycho0
pci0: i/o space, memory space enabled
ppb0 at pci0 dev 1 function 1: Sun Microsystems, Inc. Simba PCI bridge (rev. Ox13)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ebus0 at pci1 dev 1 function 0
ebus0: Sun Microsystems, Inc. PCIO Ebus2, revision 0x01
ebus0 at pci1 dev 1 function 0
ebus0: Sun Microsystems, Inc. PCIO Ebus2, revision 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 72c000-72c003, 72f000-72f003
power at ebus0 addr 724000-724003 ipl 37 not configured
SUNW,pll at ebus0 addr 504000-504002 not configured
sab0 at ebus0 addr 400000-40007f ipl 43: rev 3.2
sabtty0 at sab0 port 0: console i/o
sabtty1 at sab0 port 1
com0 at ebus0 addr 3083f8-3083ff ipl 41: ns16550a, working fifo
kbd0 at com0
com1 at ebus0 addr 3062f8-3062ff ipl 42: ns16550a, working fifo
ms0 at com1
lpt0 at ebus0 addr 3043bc-3043cb, 30015c-30015d, 700000-70000f ipl 34
fdthree at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 39 not configured
clock0 at ebus0 addr 0-1fff: mk48t59
flashprom at ebus0 addr 0-fffff not configured
audiocs0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, 722000-722003 ipl 35 ipl 36: CS4231A
audio0 at audiocs0: full duplex
hme0 at pci1 dev 1 function 1: Sun Happy Meal Ethernet, rev. 1
hme0: interrupting at ivec 3021
hme0: Ethernet address xx:xx:xx:xx:xx:xx
nsphy0 at hme0 phy 1: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ATI Technologies 3D Rage Pro (VGA display, revision 0x5c) at pci1 dev 2 function 0 not configured
cmdide0 at pci1 dev 3 function 0
cmdide0: CMD Technology PCI0646 (rev. 0x03)
cmdide0: bus-master DMA support present
cmdide0: primary channel configured to native-PCI mode
cmdide0: using ivec 1820 for native-PCI interrupt
atabus0 at cmdide0 channel 0
cmdide0: secondary channel configured to native-PCI mode
atabus1 at cmdide0 channel 1
ppb1 at pci0 dev 1 function 0: Sun Microsystems, Inc. Simba PCI bridge (rev. 0x13)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
ex0 at pci2 dev 1 function 0: 3Com 3c905B-TX 10/100 Ethernet (rev. 0x24)
ex0: interrupting at ivec 10
ex0: MAC address xx:xx:xx:xx:xx:xx
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ex1 at pci2 dev 3 function 0: 3Com 3c905B-TX 10/100 Ethernet (rev. 0x24)
ex1: interrupting at ivec 18
ex1: MAC address xx:xx:xx:xx:xx:xx
exphy1 at ex1 phy 24: 3Com internal media interface
exphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcons at mainbus0 not configured
No counter-timer -- using %tick at 400MHz as system clock.
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <ST320420A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19458 MB, 39535 cyl, 16 head, 63 sec, 512 bytes/sect x 39851760 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(cmdide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <CRD-8483B, 2000/05/10, 1.00> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(cmdide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
root on wd0a dumps on wd0b
root file system type: ffs