Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

Date: 2004-06-27 07:37:57
From: destinqo
Description: proxy, debugging linux application on BSD system (python)
[ using 382672 bytes of netbsd ELF symbol table ]
consinit: not using prom console
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6.1 (ALPHA-$Revision:[_IP_XXXX] $) #4: Tue Oct 28 09:44:17 CET 2003
    root@dec:/usr/src/sys/arch/alpha/compile/DEC
AlphaServer 4000 5/400 4MB, 400MHz, s/n AY72638572
8192 byte page size, 1 processor.
total memory = 512 MB
(2064 KB reserved for PROM, 509 MB used by NetBSD)
avail memory = 469 MB
using 3276 buffers containing 26208 KB of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21164A-2
cpu0: VAX FP support, IEEE FP support, Primary Eligible
cpu0: Architecture extensions: 1<BWX>
mcbus0 at mainbus0: 4MB BCache
mcmem0 at mcbus0 mid 1: Memory
mcpcia0 at mcbus0 mid 5: PCI Bridge
mcpcia0: Horse Revision 3, Left Handed Saddle Revision 3, CAP Revision 2
pci0 at mcpcia0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
siop0 at pci0 dev 1 function 0: Symbios Logic 53c810 (fast scsi)
siop0: interrupting at kn300 irq 36
scsibus0 at siop0: 8 targets, 8 luns per target
tlp0 at pci0 dev 2 function 0: DECchip 21140 Ethernet, pass 1.2
tlp0: broken MicroWire interface detected; setting SROM size to 1Kb
tlp0: interrupting at kn300 irq 40
tlp0: DEC DE500-XA, Ethernet address [_MAC_XXXXXXXXXX]
tlp0: 10baseT, 100baseTX, 100baseTX-FDX, 10baseT-FDX
Digital Equipment DECchip 21050 PCI-PCI Bridge (PCI bridge, revision 0x02) at pci0 dev 3 function 0 not configured
mcpcia1 at mcbus0 mid 4: PCI Bridge
mcpcia1: Horse Revision 3, Left Handed Saddle Revision 3, CAP Revision 2
pci1 at mcpcia1 bus 0
pci1: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pceb0 at pci1 dev 1 function 0: Intel 82375EB/SB PCI-EISA Bridge (PCEB) (rev. 0x15)
vga0 at pci1 dev 2 function 0: S3 Trio32/64 (rev. 0x54)
wsdisplay0 at vga0 (kbdmux ignored): console (80x25, vt100 emulation)
mlx0 at pci1 dev 4 function 0: Mylex RAID (v2 interface)
mlx0: interrupting at kn300 irq 16
mlx0: DAC960P/PD, 3 channels, firmware 2.73-0-00, 4MB RAM
ld0 at mlx0 unit 0: JBOD, online
ld0: 4091 MB, 2077 cyl, 64 head, 63 sec, 512 bytes/sect x 8378368 sectors
ld1 at mlx0 unit 1: JBOD, online
ld1: 4091 MB, 2077 cyl, 64 head, 63 sec, 512 bytes/sect x 8378368 sectors
ld2 at mlx0 unit 2: JBOD, online
ld2: 4091 MB, 2077 cyl, 64 head, 63 sec, 512 bytes/sect x 8378368 sectors
ld3 at mlx0 unit 3: JBOD, online
ld3: 4091 MB, 2077 cyl, 64 head, 63 sec, 512 bytes/sect x 8378368 sectors
eisa0 at pceb0
isa0 at pceb0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux ignored): console keyboard, using wsdisplay0
lpt0 at isa0 port 0x3bc-0x3bf irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
isabeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
scsibus0: waiting 2 seconds for devices to settle...
siop0: alloc newcdb at PHY addr 0x826c4000
cd0 at scsibus0 target 4 lun 0: <DEC, RRD46   (C) DEC, 0557> SCSI2 5/cdrom removable
cd0: sync (100.0ns offset 8), 8-bit (10.000MB/s) transfers
WARNING: can`t figure what device matches "RAID 0 4 0 0 2 6000 11069"
root on ld2a dumps on ld2b
readclock: 52/6/21/11/40/37=>1087818037 (1087471002)
WARNING: clock gained 4 days -- CHECK AND RESET THE DATE!
init: copying out path `/sbin/init` 11
IP Filter: v3.4.29 initialized.  Default = pass all, Logging = enabled
stray kn300 irq 40
setclock: 52/6/21/11/45/52
setclock: 52/6/22/16/11/10
setclock: 52/6/23/20/37/20