Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-27 15:45:41
From: Nocker
Description: NetBSD current on i386 (p3-500)
NetBSD 2.0E (WS-KERN) #2: Wed May 5 19:16:34 CEST 2004
root@ws:/isr/obj/src/sys/arch/i386/compile.i386/WS-KERN
total memory = 127 MB
avail memory = 120 MB
BIOS32 rev. 0 found at 0xfb260
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III (686-class), 501.17 MHz, id 0x673
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu0: L2 cache 512 KB 32b/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 32 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT82C691 (Apollo Pro) Host-PCI (rev. 0xc4)
agp0 at pchb0: aperture at 0xd8000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: VIA Technologies VT82C598 (Apollo MVP3) CPU-AGP Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: ATI Technologies Radeon 7500 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 7 function 0
pcib0: VIA Technologies VT82C596A (Apollo Pro) PCI-ISA Bridge (rev. 0x23)
viaide0 at pci0 dev 7 function 1
viaide0: VIA Technologies VT82C596A (Apollo Pro) ATA66 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
uhci0 at pci0 dev 7 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x11)
uhci0: interrupting at irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pchb1 at pci0 dev 7 function 3
pchb1: VIA Technologies product 0x3050 (rev. 0x30)
rtk0 at pci0 dev 15 function 0: Realtek 8139 10/100BaseTX
rtk0: interrupting at irq 5
rtk0: Ethernet address [_MAC_XXXXXXXXXX]
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bktr0 at pci0 dev 16 function 0
bktr0: interrupting at irq 11
bktr0: AVer Media TV/FM, Philips FR1216 PAL FM tuner.
radio0 at bktr0
Brooktree Bt878 Video Capture (Audio Section) (miscellaneous multimedia, revision 0x02) at pci0 dev 16 function 1 not configured
eap0 at pci0 dev 17 function 0: Ensoniq CT5880 CT5880-C (rev. 0x02)
eap0: interrupting at irq 5
eap0: ac97: SigmaTel STAC9708 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D
eap0: ac97: ext id 80<SDAC>
audio0 at eap0: full duplex, mmap, independent
midi at eap0 not configured
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug `n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug `n Play devices found
apm0 at mainbus0: Power Management spec V1.2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
ulpt0 at uhub0 port 1 configuration 1 interface 0
ulpt0: Hewlett-Packard DeskJet 930C, rev 1.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
wd0 at atabus0 drive 0: <FUJITSU MPE3204AT>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19547 MB, 39714 cyl, 16 head, 63 sec, 512 bytes/sect x 40032696 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <ATAPI CDROM, , V100T> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd1 at atapibus0 drive 1: <R/RW 8x4x32, 5VO0043DR05041, 2.0> cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
cd1(viaide0:1:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)