Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-06-27 15:51:51
From: NAron
Description: Pentium 100 Mhz - x86 machine. Home-gateway
NetBSD 1.6.2 (GENERIC) #0: Tue Feb 10 21:53:10 UTC 2004
    xxx@xxx.xxx:/autobuild/netbsd-1-6-PATCH002/i386/OBJ/autobuild
etbsd-1-6-PATCH002/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium (P54C) (586-class), 99.66 MHz
cpu0: features 1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
total memory = 32380 KB
avail memory = 23492 KB
using 430 buffers containing 1720 KB of memory
BIOS32 rev. 0 found at 0xf0210
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82439HX System Controller (TXC) (rev. 0x03)
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371SB PCI-to-ISA Bridge (PIIX3) (rev. 0x01)
pciide0 at pci0 dev 7 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x
)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 1: <Seagate Technology 1275MB - ST31276A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 1221 MB, 2482 cyl, 16 head, 63 sec, 512 bytes/sect x 2502308 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
pciide0: disabling secondary channel (no drives)
vga1 at pci0 dev 9 function 0: ATI Technologies Mach64 VT (rev. 0x08)
pci_mem_find: void region
pci_mem_find: void region
pci_mem_find: void region
pci_mem_find: void region
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
rtk0 at pci0 dev 14 function 0: RealTek 8139 10/100BaseTX
rtk0: interrupting at irq 3
rtk0: Ethernet address xx:xx:xx:xx:xx:xx
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
3COM 3C509B Ethernet card in PnP mode
pckbc0 at isa0 port 0x60-0x64wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug `n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: read port 0x203
ep0 at isapnp0 port 0x210/16 irq 5
ep0: 3Com 3C509B EtherLink III 
ep0: address xx:xx:xx:xx:xx:xx, 8KB byte-wide FIFO, 5:3 Rx:Tx split
ep0: 10baseT, 10base5, 10base2 (default 10baseT)
biomask ffd5 netmask fffd ttymask ffff
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
IP Filter: v3.4.29 initialized.  Default = pass all, Logging = enabled
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot