Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-06-27 16:49:23
From: miha
Description: Local storage server. 600Mhz AMD Athlon CPU, 3 IDE hard drives. Runs FreeBSD-4.7
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE #0: Tue Jan 28 03:54:00 GMT 2003
    xxx@xxx.xxx:/usr/src/sys/compile/ROOT
Timecounter "i8254"  frequency 1193182 Hz
CPU: AMD Athlon(tm) Processor (600.03-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x621  Stepping = 1
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 268353536 (262064K bytes)
avail memory = 257634304 (251596K bytes)
Preloaded elf kernel "kernel" at 0xc0393000.
netsmb_dev: loaded
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00f15e0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xd800-0xd80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <VIA 83C572 USB controller> at 4.2 irq 10
pci0: <VIA 83C572 USB controller> at 4.3 irq 10
pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 4.4
pci0: <S3 ViRGE graphics accelerator> at 12.0 irq 11
rl0: <RealTek 8139 10/100BaseTX> port 0xa400-0xa4ff mem 0xdb800000-0xdb8000ff irq 10 at device 13.0 on pci0
rl0: Ethernet address: xx:xx:xx:xx:xx:xx
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
DUMMYNET initialized (011031)
BRIDGE 020214 loaded
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default
IP Filter: v3.4.29 initialized.  Default = pass all, Logging = disabled
ad0: 19092MB <ST320413A> [38792/16/63] at ata0-master UDMA66
ad2: 58644MB <IC35L060AVVA07-0> [119150/16/63] at ata1-master UDMA66
ad3: 114473MB <WDC WD1200BB-00DAA3> [232581/16/63] at ata1-slave UDMA66
Mounting root from ufs:/dev/ad0s1a