Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-06-28 02:04:13
From: madtrader
Description: VIA Mini-ITX EPIA ME6000 + 1 3Com 3C905TXC network card
OpenBSD 3.4-stable (GENERIC) #5: Fri Nov 21 13:10:27 CST 2003
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: VIA C3 Samuel 2 ("CentaurHauls" 686-class) 600 MHz
cpu0: FPU,DE,TSC,MSR,MTRR,PGE,MMX,3DNOW
real mem = 234405888 (228912K)
avail mem = 211210240 (206260K)
using 2887 buffers containing 11825152 bytes (11548K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(71) BIOS, date 11/19/02, BIOS32 rev. 0 @ 0xfb210
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xdf44
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfded0/112 (5 entries)
pcibios0: PCI Exclusive IRQs: 10 11 12 15
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xfe00 0xd0000/0x800
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8623 Host-PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8633 PCI-AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA CLE266" rev 0x03: aperture at 0xe4000000, size 0x10000000
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"VIA VT6306 FireWire" rev 0x80 at pci0 dev 13 function 0 not configured
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 15
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 12
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
"VIA VT6202 USB 2.0" rev 0x82 at pci0 dev 16 function 3 not configured
pcib0 at pci0 dev 17 function 0 "VIA VT8235 PCI-ISA" rev 0x00
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST34311A>
wd0: 16-sector PIO, LBA, 4126MB, 8944 cyl, 15 head, 63 sec, 8452080 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74: irq 15 address [_MAC_XXXXXXXXXX]
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x004063, model 0x0032, rev. 5
xl0 at pci0 dev 20 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 11 address [_MAC_XXXXXXXXXX]
exphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 7
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
biomask d800 netmask d800 ttymask d802
pctr: user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302