Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2004-06-28 05:49:15
From: van
Description: The platform for testing SMP, recently injected into OpenBSD-current
OpenBSD 3.5-current (GENERIC.MP) #0: Thu Jun 24 10:58:55 NOVST 2004
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 267 MHz
real mem  = 268013568 (261732K)
avail mem = 239816704 (234196K)
using 3297 buffers containing 13504512 bytes (13188K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(9c) BIOS, date 08/10/98, BIOS32 rev. 0 @ 0xfd7b1
pcibios0 at bios0: rev. 2.1 @ 0xfd6c0/0xf2c90
pcibios0: PCI BIOS has 13 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:20:0 ("Intel 82371AB PIIX4 ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000
mainbus0: Intel MP Specification (Version 1.1) (INTEL    MB440LX DP  )
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: apic clock running at 66 MHz
cpu1 at mainbus0: apid 0 (application processor)
cpu1: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 267 MHz
mainbus0: bus 0 is type PCI   
mainbus0: bus 1 is type PCI   
mainbus0: bus 2 is type PCI   
mainbus0: bus 3 is type ISA   
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443LX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443LX AGP" rev 0x03
pci1 at ppb0 bus 1
siop0 at pci0 dev 15 function 0 "Symbios Logic 53c810" rev 0x12: apic 2 int 18 (irq 9)
scsibus0 at siop0: 8 targets
vga1 at pci0 dev 17 function 0 "Cirrus Logic CL-GD5430" rev 0x22
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 19 function 0 "Intel i960 RP PCI-PCI" rev 0x03
pci2 at ppb1 bus 2
siop1 at pci2 dev 0 function 0 "Symbios Logic 53c875" rev 0x04: apic 2 int 20 (irq 9), using 4K of on-board RAM
scsibus1 at siop1: 16 targets
siop1: target 2 now using tagged 16 bit 20.0 MHz 15 REQ/ACK offset xfers
sd0 at scsibus1 targ 2 lun 0: <SEAGATE, ST34371W SUN4.2G, 7462> SCSI2 0/direct fixed
sd0: 4094MB, 3882 cyl, 16 head, 135 sec, 512 bytes/sec, 8385121 sec total
siop1: target 6 now using 8 bit async xfers
uk0 at scsibus1 targ 6 lun 0: <ESG-SHV, SCA HSBP M3, 1.21> SCSI2 3/processor fixed
uk0: unknown device
ne3 at pci2 dev 2 function 0 "Realtek 8029" rev 0x00: apic 2 int 22 (irq 10)
ne3: address [_MAC_XXXXXXXXXX]
siop2 at pci2 dev 4 function 0 "Symbios Logic 53c875" rev 0x04: apic 2 int 20 (irq 9), using 4K of on-board RAM
scsibus2 at siop2: 16 targets
"Intel 80960RP ATU" rev 0x03 at pci0 dev 19 function 1 not configured
pcib0 at pci0 dev 20 function 0 "Intel 82371AB PIIX4 ISA" rev 0x01
pciide0 at pci0 dev 20 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus3 at atapiscsi0: 2 targets
cd0 at scsibus3 targ 0 lun 0: <ASUS, CD-S400/A, 2.1H> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
uhci0 at pci0 dev 20 function 2 "Intel 82371AB USB" rev 0x01pci_intr_map: no mapping for pin D
: couldn`t map interrupt
"Intel 82371AB Power Mgmt" rev 0x01 at pci0 dev 20 function 3 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 0 netmask 0 ttymask 0
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: sd0 matched BIOS disk 80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
cpu1: starting
cpu1: CPU at apid 0 running