Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2004-06-29 01:51:40
From: d4mi4n
Description: toshiba satellite 2410-404
Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE-p8 #4: Wed Jun 9 11:11:11 CEST 2004 root@book:/usr/obj/usr/src/sys/TUCK Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a5f000. Preloaded elf module "/boot/kernel/linux.ko" at 0xc0a5f2e4. Preloaded elf module "/boot/modules/nvidia.ko" at 0xc0a5f390. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a5f43c. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz (1794.19-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory = 536674304 (511 MB) avail memory = 511635456 (487 MB) Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <TOSHIB 750 > on motherboard pcibios: BIOS version 2.10 Using $PIR table, 8 entries at 0xc00f01a0 acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xee08-0xee0b on acpi0 acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 29 INTA is routed to irq 11 pcib0: slot 29 INTB is routed to irq 11 pcib0: slot 31 INTA is routed to irq 11 pcib0: slot 31 INTB is routed to irq 11 pcib0: slot 31 INTB is routed to irq 11 agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib1: slot 0 INTA is routed to irq 10 nvidia0: <GeForce4 420 Go> mem 0xdbf80000-0xdbffffff,0xdc000000-0xdfffffff,0xfd000000-0xfdffffff irq 10 at device 0.0 on pci1 uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xefe0-0xefff irq 11 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: Logitech USB Mouse, rev 1.10/4.10, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0xef80-0xef9f irq 11 at device 29.1 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib2: slot 7 INTA is routed to irq 11 pcib2: slot 8 INTA is routed to irq 11 pcib2: slot 13 INTA is routed to irq 11 fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfcef8000-0xfcefbfff,0xfceff800-0xfcefffff irq 11 at device 7.0 on pci2 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 [_MAC_XXXXXXXXXX]:a8:71 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: [_MAC_XXXXXXXXXX] sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0xdf40-0xdf7f mem 0xfcef7000-0xfcef7fff irq 11 at device 8.0 on pci2 fxp0: Ethernet address [_MAC_XXXXXXXXXX] miibus0: <MII bus> on fxp0 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto cbb0: <ToPIC100 PCI-CardBus Bridge> at device 11.0 on pci2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib2: slot 11 INTA is routed to irq 11 cbb0: [MPSAFE] cbb1: <ToPIC100 PCI-CardBus Bridge> at device 11.1 on pci2 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib2: slot 11 INTB is routed to irq 11 cbb1: [MPSAFE] pci2: <base peripheral> at device 13.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 UDMA100 controller> port 0xcfa0-0xcfaf,0xcfe4-0xcfe7,0xcfe8-0xcfef,0xcff4-0xcff7,0xcff8-0xcfff irq 11 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pcm0: <Intel ICH3 (82801CA)> port 0xcdc0-0xcdff,0xce00-0xceff irq 11 at device 31.5 on pci0 pcm0: <Yamaha YMF753 AC97 Codec> pci0: <simple comms> at device 31.6 (no driver attached) acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xc0000-0xcffff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1794190968 Hz quality 800 Timecounters tick every 10.000 msec GEOM: create disk ad0 dp=0xc49e3360 ad0: 28615MB <TOSHIBA MK3018GAS> [58140/16/63] at ata0-master UDMA100 acd0: CDRW <TOSHIBA DVD-ROM SD-R2212> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s3a