Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-06-29 09:56:25
From: Sam
Description: ISP2150
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.10-STABLE #0: Wed Jun  2 15:13:20 MSD 2004
    xxx@xxx.xxx:/usr/obj/usr/src/sys/dwarf
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (547.18-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x673  Stepping = 3
  Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory  = 536805376 (524224K bytes)
avail memory = 517857280 (505720K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs
 cpu0 (BSP): apic id:  1, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  0, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0382000.
netsmb_dev: loaded
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 12 entries at 0xc00fdf00
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443GX host to PCI bridge> on motherboard
IOAPIC #0 intpin 19 -> irq 2
IOAPIC #0 intpin 21 -> irq 5
pci0: <PCI bus> on pcib0
pcib2: <Intel 82443GX (440 GX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pcib3: <PCI to PCI bridge (vendor=1011 device=0023)> at device 15.0 on pci1
pci2: <PCI bus> on pcib3
pcib4: <PCI to PCI bridge (vendor=104c device=ac21)> at device 4.0 on pci2
IOAPIC #0 intpin 20 -> irq 9
pci3: <PCI bus> on pcib4
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x3000-0x303f mem 0xf4200000-0xf42fffff,0xf4300000-0xf4300fff irq 9 at device 4.0 on pci3
fxp0: Ethernet address xx:xx:xx:xx:xx:xx
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2000-0x20ff mem 0xf4100000-0xf4100fff irq 2 at device 12.0 on pci0
aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2400-0x24ff mem 0xf4101000-0xf4101fff irq 2 at device 12.1 on pci0
aic7896/97: Ultra2 Wide Channel B, SCSI Id=7, 32/253 SCBs
fxp1: <Intel 82559 Pro/100 Ethernet> port 0x2800-0x283f mem 0xf4000000-0xf40fffff,0xf4102000-0xf4102fff irq 5 at device 14.0 on pci0
fxp1: Ethernet address xx:xx:xx:xx:xx:xx
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <Intel 82371AB PCI to ISA bridge> at device 18.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x2860-0x286f at device 18.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 18.2 irq 5
intpm0: <Intel 82371AB Power management controller> port 0x1040-0x104f irq 9 at device 18.3 on pci0
intpm0: I/O mapped 1040
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped c00
pci0: <Cirrus Logic GD5480 SVGA controller> at 20.0
pcib1: <Intel 82443GX host to AGP bridge> on motherboard
pci4: <PCI bus> on pcib1
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcd7ff,0xcd800-0xcdfff,0xce000-0xcf7ff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.31 initialized.  Default = pass all, Logging = enabled
ata1-slave: ATAPI identify retries exceeded
SMP: AP CPU #1 Launched!
acd0: CDROM <CD-224E> at ata1-master PIO4
Waiting 3 seconds for SCSI devices to settle
pass2 at ahc0 bus 0 target 6 lun 0
pass2: <ESG-SHV SCA HSBP M10 0.06> Fixed Processor SCSI-2 device
pass2: 3.300MB/s transfers
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DDYS-T09170M S80D> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <IBM DDYS-T09170M S80D> Fixed Direct Access SCSI-3 device
da1: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da1: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
Mounting root from ufs:/dev/da0s1a