Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-06-29 13:10:15
From: anarcat
Description: pentium II (verbose)
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.9-STABLE #1: Mon Jan 19 15:06:56 EST 2004
    xxx@xxx.xxx:/usr/obj/usr/src/sys/WWW
Calibrating clock(s) ... TSC clock: 300771893 Hz, i8254 clock: 1193540 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254"  frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium II/Pentium II Xeon/Celeron (300.68-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x650  Stepping = 0
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 134205440 (131060K bytes)
Physical memory chunk(s):
0x000001000 - 0x00009ffff, 651264 bytes (159 pages)
0x000384000 - 0x007ff4fff, 130486272 bytes (31857 pages)
config> di pcic0
No such device: pcic0
Invalid command or syntax.  Type `?` for help.
config> di psm0
config> di sn0
No such device: sn0
Invalid command or syntax.  Type `?` for help.
config> di lnc0
No such device: lnc0
Invalid command or syntax.  Type `?` for help.
config> di ie0
No such device: ie0
Invalid command or syntax.  Type `?` for help.
config> di fe0
No such device: fe0
Invalid command or syntax.  Type `?` for help.
config> di ed0
No such device: ed0
Invalid command or syntax.  Type `?` for help.
config> di cs0
No such device: cs0
Invalid command or syntax.  Type `?` for help.
config> di bt0
No such device: bt0
Invalid command or syntax.  Type `?` for help.
config> di aic0
No such device: aic0
Invalid command or syntax.  Type `?` for help.
config> di aha0
No such device: aha0
Invalid command or syntax.  Type `?` for help.
config> di adv0
No such device: adv0
Invalid command or syntax.  Type `?` for help.
config> q
avail memory = 127209472 (124228K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f9ce0
bios32: Entry = 0xf0550 (c00f0550)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0x750
pnpbios: Found PnP BIOS data at 0xc00fd110
pnpbios: Entry = f0000:d140  Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
ACPI: 000f7d40
Preloaded elf kernel "kernel" at 0xc035d000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc035d0a8.
Pentium Pro MTRR support enabled
Creating DISK md0
md0: Malloc disk
Math emulator present
pci_open(1):    mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=00] is there (id=71808086)
Using $PIR table, 5 entries at 0xc00f0d40
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443LX (440 LX) host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x7180, revid=0x03
        class=06-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[10]: type 1, range 32, base e4000000, size 26
found-> vendor=0x8086, dev=0x7181, revid=0x03
        class=06-04-00, hdrtype=0x01, mfdev=0
        subordinatebus=1        secondarybus=1
found-> vendor=0x8086, dev=0x7110, revid=0x02
        class=06-01-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
        class=01-01-80, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[20]: type 1, range 32, base 0000d800, size  4
found-> vendor=0x8086, dev=0x7112, revid=0x01
        class=0c-03-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=d, irq=12
        map[20]: type 1, range 32, base 0000d400, size  5
found-> vendor=0x8086, dev=0x7113, revid=0x02
        class=06-80-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[90]: type 1, range 32, base 0000e800, size  4
found-> vendor=0x8086, dev=0x1229, revid=0x08
        class=02-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=a, irq=10
        map[10]: type 1, range 32, base e3000000, size 12
        map[14]: type 1, range 32, base 0000d000, size  6
        map[18]: type 1, range 32, base e2800000, size 20
found-> vendor=0x5333, dev=0x8901, revid=0x16
        class=03-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=a, irq=11
        map[10]: type 1, range 32, base dc000000, size 26
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443LX (440 LX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xd800-0xd80f at device 4.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd800
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd808
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 00 00
ata1: mask=03 stat0=00 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd400-0xd41f irq 12 at device 4.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on pci0
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd000-0xd03f mem 0xe2800000-0xe28fffff,0xe3000000-0xe3000fff irq 10 at device 10.0 on pci0
fxp0: using memory space register mapping
fxp0: Ethernet address xx:xx:xx:xx:xx:xx
fxp0: PCI IDs: 8086 1229 8086 000e 0008
fxp0: Dynamic Standby mode is disabled
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
pci0: <S3 Trio 64V2/DX/GX graphics accelerator> (vendor=0x5333, dev=0x8901) at 12.0 irq 11
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
isa_probe_children: probing PnP devices
BIOS Geometries:
 0:03107f3f 0..784=785 cylinders, 0..127=128 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
bpf: faith0 attached
bpf: lo0 attached
ad0: success setting UDMA2 on Intel chip
Creating DISK ad0
ar: FreeBSD check1 failed
ad0: <FUJITSU MPB3032ATU E/4010> ATA-3 disk at ata0-master
ad0: 3093MB (6335280 sectors), 6704 C, 15 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <CRD-8322B/1.02> CDROM drive at ata1 as master
acd0: read 5500KB/s (21KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked, lock protected
acd0: Medium: no/blank disc
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 6330239, size 6330177 : OK