Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-06-30 05:17:36
From: yonailo
Description: hp/compaq nx9010 FreeBSD-4.10
ACPI debug layer 0x0  debug level 0x0
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.10-STABLE #9: Mon Jun 21 13:07:54 CEST 2004
    xxx@xxx.xxx:/usr/src/sys/compile/JUANILLO
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz (2658.31-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
  Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory  = 234291200 (228800K bytes)
avail memory = 222064640 (216860K bytes)
Preloaded elf kernel "kernel" at 0xc05b1000.
Preloaded elf module "uplcom.ko" at 0xc05b109c.
Preloaded elf module "ucom.ko" at 0xc05b113c.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00fdf30
acpi0: <PTLTD    RSDT  > on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe"  frequency 3579545 Hz
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
unknown: I/O range not supported
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1002 device=7010)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4337 graphics accelerator> at 5.0
pci0: <unknown card> (vendor=0x10b9, dev=0x5451) at 6.0 irq 5
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <unknown card> (vendor=0x10b9, dev=0x5457) at 8.0
pci_cfgintr_virgin: using routable interrupt 7
pci_cfgintr: 0:10 INTA routed to irq 7
pcic0: <O2micro 6912 PCI-Cardbus Bridge> irq 7 at device 10.0 on pci0
pcic0: Could not map register memory 0xd4002000
device_probe_and_attach: pcic0 attach returned 12
uhci0: <VIA 83C572 USB controller> port 0x2000-0x201f irq 10 at device 11.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: NEC Corporation USB2.0 Hub Controller, class 9/0, rev 2.00/1.00, addr 2
uhub1: 3 ports with 3 removable, self powered
ums0: Logitech USB Mouse, rev 1.10/4.00, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
uhci1: <VIA 83C572 USB controller> port 0x2020-0x203f irq 10 at device 11.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <USB controller> at 11.2
fwohci0: vendor=104c, dev=8026
fwohci0: <1394 Open Host Controller Interface> at device 12.0 on pci0
fwohci0: Invalid irq 255
fwohci0: Please switch PNP-OS to `No` in BIOS
fwohci0: Could not map memory
device_probe_and_attach: fwohci0 attach returned 6
atapci0: <AcerLabs Aladdin ATA100 controller> port 0x2040-0x204f irq 0 at device 16.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
chip1: <AcerLabs M15x3 Power Management Unit> at device 17.0 on pci0
sis0: <NatSemi DP83815 10/100BaseTX> port 0x2400-0x24ff mem 0xd4008000-0xd4008fff irq 10 at device 18.0 on pci0
sis0: Ethernet address: xx:xx:xx:xx:xx:xx
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcf7ff,0xdf000-0xdffff,0xe0000-0xe3fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <Intel i82365SL-DF> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pccard1: <PC Card 16-bit bus (classic)> on pcic0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/1 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 38154MB <FUJITSU MHT2040AT> [77520/16/63] at ata0-master UDMA100
acd0: CD-RW <TOSHIBA DVD-ROM SD-R2312> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <TOSHIBA DVD-ROM SD-R2312 X905> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled
IPv6 packet filtering initialized, logging disabled
pcm0: <Acer Labs M5451> port 0x1000-0x10ff irq 5 at device 6.0 on pci0
pcm0: <Conexant CX20468 AC97 Codec>
pcic2: <O2micro 6912 PCI-Cardbus Bridge> irq 7 at device 10.0 on pci0
pcic2: Could not map register memory 0xd4002000
device_probe_and_attach: pcic2 attach returned 12
fwohci0: vendor=104c, dev=8026
fwohci0: <1394 Open Host Controller Interface> at device 12.0 on pci0
fwohci0: Invalid irq 255
fwohci0: Please switch PNP-OS to `No` in BIOS
fwohci0: Could not map memory
device_probe_and_attach: fwohci0 attach returned 6
pid 220 (vmware-checkvm), uid 0: exited on signal 10
pid 225 (vmware-checkvm), uid 0: exited on signal 10
vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 (3.2.x mvm) $
vmmon: Module vmmon: initialized
sis0: promiscuous mode enabled
sis0: promiscuous mode disabled