Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-06-30 12:21:49
From: Caliban
Description: Sun Ultra 5, with the 360Mhz 64-bit UltraSparc IIi CPU. The Ultra`s had the crap IDE interface (as in, broken by design) rather than SCSI, so bonni++ benchmarks on it are rather abysmal. Has ethernet on board as well as the 4-port hme interface (used to be a firewall). Currently used as the web and mail server for a local user group.
FreeBSD 5.2-CURRENT #0: Fri Apr 16 14:35:11 CST 2004
    xxx@xxx.xxx:/usr/obj/usr/src/sys/CALIBAN
Preloaded elf kernel "/boot/kernel/kernel" at 0xc050a000.
Timecounter "tick" frequency 360000000 Hz quality 0
real memory  = 402653184 (384 MB)
avail memory = 376864768 (359 MB)
cpu0: Sun Microsystems UltraSparc-IIi Processor (360.00 MHz CPU)
random: <entropy source, Software, Yarrow>
nexus0: <OpenFirmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Sabre, impl 0, version 0, ign 0x7c0, bus A
pcib0: [FAST]
pcib0: [GIANT-LOCKED]
pcib0: [FAST]
pcib0: [GIANT-LOCKED]
DVMA map: 0xc0000000 to 0xc3ffffff
pci0: <OFW PCI bus> on pcib0
pcib1: <APB PCI-PCI bridge> at device 1.1 on pci0
pci1: <OFW PCI bus> on pcib1
ebus0: revision 0x01
ebus0: <PCI-EBus2 bridge> mem 0xf1000000-0xf17fffff,0xf0000000-0xf0ffffff at device 1.0 on pci1
ebus0: <auxio> addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003,0x1400728000-0x1400728003,0x
1400726000-0x1400726003 (no driver attached)
ebus0: <power> addr 0x1400724000-0x1400724003 irq 37 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
ebus0: <se> addr 0x1400400000-0x140040007f irq 43 (no driver attached)
ebus0: <su> addr 0x14003083f8-0x14003083ff irq 41 (no driver attached)
ebus0: <su> addr 0x14003062f8-0x14003062ff irq 42 (no driver attached)
ebus0: <ecpp> addr 0x1400700000-0x140070000f,0x140030015c-0x140030015d,0x14003043bc-0x14003043cb irq 34 (no driver attached)
ebus0: <fdthree> addr 0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003023f0-0x14003023f7 irq 39 (no driver attached
)
eeprom0: <EBus EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: could not allocate resources
device_probe_and_attach: eeprom0 attach returned 6
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
ebus0: <SUNW,CS4231> addr 0x1400722000-0x1400722003,0x1400704000-0x140070400f,0x1400702000-0x140070200f,0x1400200000-0x1400200
0ff irq 36,35 (no driver attached)
hme0: <Sun HME 10/100 Ethernet> at device 1.1 on pci1
pcib1: can`t decode default resource id 16 for hme0, bypassing
hme0: Lazy allocation of 0x8000 bytes rid 0x10 type 3 at 0
hme0: hme_stop: reset failed
hme0: phy probe failed: 6
hme0: could not be configured
device_probe_and_attach: hme0 attach returned 6
pci1: <display, VGA> at device 2.0 (no driver attached)
atapci0: <CMD 646 WDMA2 controller> port 0xc00020-0xc0002f,0xc00018-0xc0001b,0xc00010-0xc00017,0xc00008-0xc0000b,0xc00000-0xc0
0007 at device 3.0 on pci1
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc00020
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xc00000
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xc00008
ata2: at 0xc00000 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xc00010
atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xc00018
ata3: at 0xc00010 on atapci0
pcib2: <APB PCI-PCI bridge> at device 1.0 on pci0
pci2: <OFW PCI bus> on pcib2
pcib3: <OFW PCI-PCI bridge> at device 3.0 on pci2
pci3: <OFW PCI bus> on pcib3
pci3: <bridge, PCI-unknown> at device 0.0 (no driver attached)
pci3:0:0: Transition from D0 to D3
hme0: <Sun HME 10/100 Ethernet> at device 0.1 on pci3
hme0: Lazy allocation of 0x8000 bytes rid 0x10 type 3 at 0x100000
pcib3: slot 0 INTB is routed to irq 25
miibus0: <MII bus> on hme0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: Ethernet address: xx:xx:xx:xx:xx:xx
hme0: [GIANT-LOCKED]
pci3: <bridge, PCI-unknown> at device 1.0 (no driver attached)
pci3:1:0: Transition from D0 to D3
hme1: <Sun HME 10/100 Ethernet> at device 1.1 on pci3
hme1: Lazy allocation of 0x8000 bytes rid 0x10 type 3 at 0x108000
pcib3: slot 1 INTB is routed to irq 26
miibus1: <MII bus> on hme1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme1: Ethernet address: xx:xx:xx:xx:xx:xx
hme1: [GIANT-LOCKED]
pci3: <bridge, PCI-unknown> at device 2.0 (no driver attached)
pci3:2:0: Transition from D0 to D3
hme2: <Sun HME 10/100 Ethernet> at device 2.1 on pci3
hme2: Lazy allocation of 0x8000 bytes rid 0x10 type 3 at 0x110000
pcib3: slot 2 INTB is routed to irq 27
miibus2: <MII bus> on hme2
ukphy2: <Generic IEEE 802.3u media interface> on miibus2
ukphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme2: Ethernet address: xx:xx:xx:xx:xx:xx
hme2: [GIANT-LOCKED]
pci3: <bridge, PCI-unknown> at device 3.0 (no driver attached)
pci3:3:0: Transition from D0 to D3
hme3: <Sun HME 10/100 Ethernet> at device 3.1 on pci3
hme3: Lazy allocation of 0x8000 bytes rid 0x10 type 3 at 0x118000
pcib3: slot 3 INTB is routed to irq 24
miibus3: <MII bus> on hme3
ukphy3: <Generic IEEE 802.3u media interface> on miibus3
ukphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme3: Ethernet address: xx:xx:xx:xx:xx:xx
hme3: [GIANT-LOCKED]
Timecounters tick every 0.976 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 5 packets/entry by def
ault
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.31 initialized.  Default = pass all, Logging = enabled
ad0: 8223MB <ST38410A> [16708/16/63] at ata2-master PIO4
acd0: CDRW <CRD-8322B> at ata3-master PIO4
Mounting root from ufs:/dev/ad0a
warning: no time-of-day clock registered, system time will not be set accurately
vlan0: Ethernet address: xx:xx:xx:xx:xx:xx
Accounting enabled