Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-07-01 01:54:17
From: Den
Description: XEON 2X, FreeBSD 5.2-CURRENT
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #0: Wed Jun  9 12:34:14 MSD 2004
    xxx@xxx.xxx:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc09f5000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc09f5244.
ACPI APIC Table: <INTEL  S7501HG0>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.66GHz (2658.10-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 1073676288 (1023 MB)
avail memory = 1041219584 (992 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  6
 cpu3 (AP): APIC ID:  7
    ACPI-0697: *** Warning: Type override - [DEB_] had invalid type (Integer) for Scope operator, changed to (Scope)
    ACPI-0697: *** Warning: Type override - [MLIB] had invalid type (Integer) for Scope operator, changed to (Scope)
    ACPI-0697: *** Warning: Type override - [DATA] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0697: *** Warning: Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0697: *** Warning: Type override - [LEDP] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0697: *** Warning: Type override - [GPEN] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0697: *** Warning: Type override - [GPST] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0697: *** Warning: Type override - [GP1N] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0697: *** Warning: Type override - [WUES] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0697: *** Warning: Type override - [WUSE] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0697: *** Warning: Type override - [SBID] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0697: *** Warning: Type override - [SWCE] had invalid type (String) for Scope operator, changed to (Scope)
    ACPI-0697: *** Warning: Type override - [CMS2] had invalid type (String) for Scope operator, changed to (Scope)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
lapic0: Forcing LINT1 to edge trigger
random: <entropy source, Software, Yarrow>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <INTEL S7501HG0> on motherboard
acpi0: [GIANT-LOCKED]
pcibios: BIOS version 2.10
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.P0P5 - AE_NOT_FOUND
pci2: <ACPI PCI bus> on pcib1
pci2: <base peripheral, interrupt controller> at device 28.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci2
pci4: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0x4040-0x407f mem 0xfea60000-0xfea7ffff irq 58 at device 5.0 on pci4
em0: [GIANT-LOCKED]
em0: Ethernet address: xx:xx:xx:xx:xx:xx
em0:  Speed:N/A  Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0x4000-0x403f mem 0xfea80000-0xfea9ffff irq 59 at device 5.1 on pci4
em1: [GIANT-LOCKED]
em1: Ethernet address: xx:xx:xx:xx:xx:xx
em1:  Speed:N/A  Duplex:N/A
pci2: <base peripheral, interrupt controller> at device 30.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 31.0 on pci2
pci3: <ACPI PCI bus> on pcib3
ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x3000-0x30ff,0x2800-0x28ff mem 0xfe9e0000-0xfe9e1fff irq 30 at device 4.0 on pci3
ahd0: [GIANT-LOCKED]
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x2400-0x24ff,0x2000-0x20ff mem 0xfe9f0000-0xfe9f1fff irq 31 at device 4.1 on pci3
ahd1: [GIANT-LOCKED]
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
pci0: <unknown> at device 3.1 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x5040-0x505f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x5020-0x503f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x5000-0x501f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib4
pci1: <display, VGA> at device 12.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0x3a0-0x3af,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
acpi_ec0: <Embedded Controller: GPE 0x8> port 0xca7,0xca6 on acpi0
    ACPI-0502: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
    ACPI-1303: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.ECCW] (Node 0xc22766e0), AE_AML_NO_RETURN_VALUE
    ACPI-1303: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.SREC] (Node 0xc22767a0), AE_AML_NO_RETURN_VALUE
    ACPI-1303: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.SSLP] (Node 0xc2276660), AE_AML_NO_RETURN_VALUE
    ACPI-1303: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_._REG] (Node 0xc22769e0), AE_AML_NO_RETURN_VALUE
acpi_ec0: can`t install address space handler for \_SB_.PCI0.SBRG.EC0_ - AE_AML_NO_RETURN_VALUE
device_attach: acpi_ec0 attach returned 6
fdc0: I/O to control range incorrect
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acpi_ec0: <Embedded Controller: GPE 0x8> port 0xca7,0xca6 on acpi0
fdc0: I/O to control range incorrect
orm0: <Option ROMs> at iomem 0xd3800-0xd4fff,0xd2000-0xd37ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
fdc0: cannot reserve I/O port range (6 ports)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
Waiting 15 seconds for SCSI devices to settle
da0 at ahd0 bus 0 target 0 lun 0
da0: <SEAGATE ST373307LW 0006> Fixed Direct Access SCSI-3 device 
da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
da1 at ahd0 bus 0 target 1 lun 0
da1: <SEAGATE ST373307LW 0006> Fixed Direct Access SCSI-3 device 
da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da1: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
lapic6: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
Mounting root from ufs:/dev/da0s1a