Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2004-07-02 02:21:50
From: Kevin Day
Description: Compaq ML370
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #0: Thu Apr 17 22:30:11 CDT 2003
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXX]:/usr/src/sys/compile/SERVER
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel Pentium III (930.39-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 939507712 (917488K bytes)
avail memory = 910422016 (889084K bytes)
Changing APIC ID for IO APIC #0 from 0 to 8 on chip
Programming 35 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 8, version: 0x00220011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0385000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
IOAPIC #0 intpin 19 -> irq 2
IOAPIC #0 intpin 18 -> irq 5
IOAPIC #0 intpin 17 -> irq 10
pci0: <PCI bus> on pcib0
sym0: <1510d> port 0x2000-0x20ff mem 0xc6efe000-0xc6efefff,0xc6effc00-0xc6efffff irq 2 at device 1.0 on pci0
sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym1: <1510d> port 0x2400-0x24ff mem 0xc6efc000-0xc6efcfff,0xc6efdc00-0xc6efdfff irq 5 at device 1.1 on pci0
sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x2800-0x283f mem 0xc6d00000-0xc6dfffff,0xc6efb000-0xc6efbfff irq 10 at device 2.0 on pci0
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <ATI Mach64-GV graphics accelerator> at 3.0
pci0: <unknown card> (vendor=0x0e11, dev=0xa0f0) at 4.0
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x3000-0x300f at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcib3: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
IOAPIC #0 intpin 31 -> irq 11
pci3: <PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.4.10> port 0x4000-0x401f mem 0xc6fc0000-0xc6fdffff,0xc6fe0000-0xc6ffffff irq 11 at device 6.0 on pci3
em0: Speed:N/A Duplex:N/A
eisa0: <EISA bus> on motherboard
mainboard0: <CPQ0690 (System Board)> on eisa0 slot 0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xe8000-0xedfff,0xee000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
DUMMYNET initialized (011031)
IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to accept, logging disabled
SMP: AP CPU #1 Launched!
acd0: CDROM <COMPAQ SC-140S> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at sym1 bus 0 target 0 lun 0
da0: <COMPAQ BB01813467 3B07> Fixed Direct Access SCSI-2 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da0: 17365MB (35565080 512 byte sectors: 255H 63S/T 2213C)