Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2004-07-05 03:02:37
From: bazerka
Description: PIII 733MHz, 512MB RAM, FreeBSD 4.10
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.10-STABLE #0: Tue May 25 23:52:45 BST 2004
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel Pentium III (733.36-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
real memory  = 536805376 (524224K bytes)
config> q
avail memory = 518586368 (506432K bytes)
Preloaded elf kernel "kernel" at 0xc03a9000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03a909c.
Preloaded elf module "snd_emu10k1.ko" at 0xc03a90ec.
Preloaded elf module "snd_pcm.ko" at 0xc03a9190.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xd8000000-0xdbffffff at device 0.0 on pci0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva TNT graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xc000-0xc01f irq 5 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip0: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0
pcm0: <Creative EMU10K1> port 0xc400-0xc41f irq 5 at device 11.0 on pci0
pcm0: <TriTech TR28023 AC97 Codec>
atapci1: <Promise TX2 ATA133 controller> port 0xdc00-0xdc0f,0xd800-0xd803,0xd400-0xd407,0xd000-0xd003,0xcc00-0xcc07 mem 0xe2000000-0xe2003fff irq 12 at device 13.0 on pci0
ata2: at 0xcc00 on atapci1
ata3: at 0xd400 on atapci1
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe000-0xe07f mem 0xe2005000-0xe200507f irq 10 at device 15.0 on pci0
xl0: Ethernet address: xx:xx:xx:xx:xx:xx
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0xe400-0xe47f mem 0xe2004000-0xe200407f irq 11 at device 17.0 on pci0
xl1: Ethernet address: xx:xx:xx:xx:xx:xx
miibus1: <MII bus> on xl1
xlphy1: <3c905C 10/100 internal PHY> on miibus1
xlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xc0000-0xc87ff,0xcc000-0xcdfff,0xd0000-0xd27ff,0xd3000-0xd37ff,0xd4000-0xd47ff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
DUMMYNET initialized (011031)
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging disabled
ad0: 12417MB <FUJITSU MPD3130AT> [25230/16/63] at ata0-master UDMA33
ad5: 117246MB <Maxtor 4G120J6> [238216/16/63] at ata2-slave UDMA133
Mounting root from ufs:/dev/ad0s1a
link_elf: symbol splash_register undefined
ng0: promiscuous mode enabled