Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2004-07-06 03:38:13
From: KJ
Description: TOSHIBA DynaBook SS2000 DS75P/2
FreeBSD XXX 5.2-CURRENT FreeBSD 5.2-CURRENT #0: Tue Jun 8 13:12:54 JST 2004 root@XXX:/usr/src/sys/i386/compile/GENERIC i386
inchiki_dyna# dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #0: Tue Jun 8 13:12:54 JST 2004
root@XXX:/usr/src/sys/i386/compile/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a6a000.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) III Mobile CPU 750MHz (746.97-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 385220608 (367 MB)
avail memory = 367259648 (350 MB)
random: <entropy source, Software, Yarrow>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard
pci0: <PCI bus> on pcib0
$PIR: 0:6 INTA routed to irq 11
$PIR: 0:10 INTA routed to irq 11
$PIR: 0:12 INTA routed to irq 11
$PIR: 0:12 INTB routed to irq 11
$PIR: 0:18 INTA routed to irq 11
agp0: <Ali Generic host to PCI bridge> mem 0xf0000000-0xf3ffffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
$PIR: 1:0 INTA routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
atapci0: <AcerLabs Aladdin UDMA66 controller> port 0xeff0-0xefff,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 4.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: simplex device, DMA on primary only
ata1: at 0x170 irq 15 on atapci0
pci0: <multimedia, audio> at device 6.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <bridge, PCI-unknown> at device 8.0 (no driver attached)
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xeb40-0xeb7f mem 0xf7ec0000-0xf7edffff,0xf7efe000-0xf7efefff irq 11 at device 10.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: XX:XX:XX:XX:XX:XX
fxp0: [GIANT-LOCKED]
ohci0: <NEC uPD 9210 USB controller> mem 0xf7ebf000-0xf7ebffff irq 11 at device 12.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0
usb0: SMM does not respond, resetting
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0xf7ebe000-0xf7ebefff irq 11 at device 12.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
cbb0: <ToPIC100 PCI-CardBus Bridge> at device 17.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
$PIR: 0:17 INTA routed to irq 11
cbb0: bad Vcc request. ctrl=0xf000ef08, status=0xf000e2c3
cbb_power: 0V
pci0: <base peripheral> at device 18.0 (no driver attached)
cpu0 on motherboard
orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0c01> can`t assign resources (memory)
unknown: <PNP0303> can`t assign resources (port)
unknown: <PNP0f13> can`t assign resources (irq)
Timecounter "TSC" frequency 746973200 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 19073MB <TOSHIBA MK2003GAH> [38752/16/63] at ata0-master UDMA66
Mounting root from ufs:/dev/ad0s1a
fxp0: promiscuous mode enabled
fxp0: promiscuous mode disabled