Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2004-07-06 16:52:18
From: Richard Bejtlich
Description: Dell PowerEdge 750 with single 2.8 GHz PIV HTT CPU (seen as two logical CPUs) and Dell CERC SATA 1.5/6ch RAID0 (two 250 GB Maxtor HDDs, 465 GB reported on drive aacd0) running FreeBSD 5-CURRENT. FreeBSD 5.2.1 REL didn`t see HDD.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT-20040617-JPSNAP #0: Thu Jun 17 01:58:11 GMT 2004
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc09f8000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc09f826c.
ACPI APIC Table: <DELL   PE750   >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2800.11-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf34  Stepping = 4
  Hyperthreading: 2 logical CPUs
real memory  = 536608768 (511 MB)
avail memory = 515424256 (491 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic1: Changing APIC ID to 3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
random: <entropy source, Software, Yarrow>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL PE750> on motherboard
pcibios: BIOS version 2.10
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0xece0-0xecff
 mem 0xfe2e0000-0xfe2fffff irq 18 at device 1.0 on pci1
em0: Ethernet address: xx:xx:xx:xx:xx:xx
em0:  Speed:N/A  Duplex:N/A
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
aac0: <Dell CERC SATA RAID 2> mem 0xf4000000-0xf7ffffff irq 24 at device 1.0 on 
aac0: [FAST]
aac0: Unknown processor 100MHz, 48MB cache memory, optional battery not installe
aac0: Kernel 4.1-0, Build 7028, S/N bbb3fd
uhci0: <UHCI (generic) USB controller> port 0xcce0-0xccff irq 16 at device 29.0 
on pci0
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xccc0-0xccdf irq 19 at device 29.1 
on pci0
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <base peripheral> at device 29.4 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 29.5 (no driver attached
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0xdcc0-0xdcff
 mem 0xfdee0000-0xfdefffff irq 21 at device 2.0 on pci3
em1: Ethernet address: xx:xx:xx:xx:xx:xx
em1:  Speed:N/A  Duplex:N/A
em2: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0xdc80-0xdcbf
 mem 0xfdec0000-0xfdedffff irq 22 at device 3.0 on pci3
em2: Ethernet address: xx:xx:xx:xx:xx:xx
em2:  Speed:N/A  Duplex:N/A
em3: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0xdc40-0xdc7f
 mem 0xfdea0000-0xfdebffff irq 21 at device 3.1 on pci3
em3: Ethernet address: xx:xx:xx:xx:xx:xx
em3:  Speed:N/A  Duplex:N/A
pci3: <display, VGA> at device 14.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 6300ESB SATA150 controller> port 0xfea0-0xfeaf,0x376,0x170-0x177
,0x3f6,0x1f0-0x1f7 at device 31.2 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0
x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
orm0: <Option ROMs> at iomem 0xec000-0xeffff,0xcd000-0xcdfff,0xc9000-0xccfff,0xc
8000-0xc8fff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acd0: CDROM <SAMSUNG CD-ROM SN-124> at ata0-master PIO4
aacd0: <RAID 0 (Stripe)> on aac0
aacd0: 476771MB (976427008 sectors)
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/aacd0s2a
em0: Link is up 100 Mbps Full Duplex