Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-07-08 15:33:25
From: detsaoT
Description: Dell Dimension desktop. Whee, fun!
tokyo. vi /var/run/dmesg.boot

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2-RELEASE #0: Mon Jan 19 09:38:13 EST 2004
    xxx@xxx.xxx:/usr/src/sys/i386/compile/TOKYODELL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc077a000.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 1.80GHz (1794.19-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf13  Stepping = 3
  Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUS
H,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory  = 267321344 (254 MB)
avail memory = 254324736 (242 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 6 entries at 0xc00fdef0
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci_cfgintr: 0:31 INTB BIOS irq 11
pci_cfgintr: 0:31 INTB BIOS irq 11
agp0: <Intel 82845G (845G GMCH) SVGA controller> mem 0xee000000-0xee07ffff,0xe0000000-0xe7ffffff irq
 5 at device 2.0 on pci0
agp0: detected 892k stolen memory
agp0: aperture size is 128M
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xd800-0xd81f irq 9 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xd000-0xd01f irq 5 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ugen0: APC Back-UPS ES 500 FW:801.e5.D USB FW:e5, rev 1.10/1.06, addr 2
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xd400-0xd41f irq 3 at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib1: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
pci_cfgintr: 1:5 INTA BIOS irq 11
pci_cfgintr: 1:6 INTA BIOS irq 3
pci_cfgintr: 1:9 INTA BIOS irq 11
rl0: <D-Link DFE-530TX+ 10/100BaseTX> port 0xc000-0xc0ff mem 0xed012000-0xed0120ff irq 11 at device
5.0 on pci1
rl0: Ethernet address: xx:xx:xx:xx:xx:xx
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci1: <simple comms> at device 6.0 (no driver attached)
pci1: <network, ethernet> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 o
n pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
orm0: <Option ROMs> at iomem 0xd4000-0xd57ff,0xcc000-0xd3fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
device_probe_and_attach: atkbd0 attach returned 6
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio2: configured irq 5 not in bitmap of probed irqs 0
sio2: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can`t assign resources (port)
unknown: <PNP0c02> can`t assign resources (memory)
unknown: <PNP0501> can`t assign resources (port)
unknown: <PNP0400> can`t assign resources (port)
Timecounter "TSC" frequency 1794187896 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc299cb60
ad0: 28629MB <WDC WD300EB-75CPF0> [58168/16/63] at ata0-master UDMA100
acd0: CDROM <Lite-On LTN486S 48x Max> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
Accounting enabled