Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-07-09 22:39:03
From: cybs
Description: Athlon 800MHz sdram pc100 512MB Nvidia geforce2 HDD IBM ATA100 3com 3c905TX SCSI Symbios card with MATSHITA 4x cd burner
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2-BETA #1: Sun Nov 23 16:33:57 CET 2003
    @cs13:/usr/obj/usr/src/sys/CYB
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b39000.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) Processor (800.03-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x622  Stepping = 2
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 536788992 (511 MB)
avail memory = 511754240 (488 MB)
Pentium Pro MTRR support enabled
acpi0: <ASUS   K7V-T   > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00f1570
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 4 INTD is routed to irq 9
pcib0: slot 4 INTD is routed to irq 9
pcib0: slot 9 INTA is routed to irq 9
pcib0: slot 10 INTA is routed to irq 5
pcib0: slot 11 INTA is routed to irq 10
agp0: <VIA Generic host to PCI bridge> mem 0xe4000000-0xe7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib0: slot 1 INTA is routed to irq 11
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686A UDMA66 controller> port 0xd800-0xd80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 9 at device 4.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
uhub0: port error, restarting port 2
uhub0: port error, giving up port 2
uaudio0: audio descriptors make no sense, error=4
device_probe_and_attach: uaudio0 attach returned 6
ugen0: Logitech Camera, rev 2.00/1.00, addr 2
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 9 at device 4.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub1: port error, restarting port 1
uhub1: port error, giving up port 1
uhub1: port error, restarting port 2
uhub1: port error, giving up port 2
pcm0: <Creative CT5880-C> port 0xa400-0xa43f irq 9 at device 9.0 on pci0
pcm0: <TriTech TR28602 AC97 Codec>
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xa000-0xa03f irq 5 at device 10.0 on pci0
xl0: Ethernet address: xx:xx:xx:xx:xx:xx
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sym0: <810a> port 0x9800-0x98ff mem 0xd5800000-0xd58000ff irq 10 at device 11.0 on pci0
sym0: Symbios NVRAM, ID 7, Fast-10, SE, parity checking
sym0: open drain IRQ line driver
sym0: using LOAD/STORE-based firmware.
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
orm0: <Option ROMs> at iomem 0xcc000-0xcc7ff,0xc0000-0xcb7ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 800032416 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default
IPsec: Initialized Security Association Processing.
acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0%
GEOM: create disk ad0 dp=0xc4831d60
ad0: 117800MB <IC35L120AVVA07-0> [239340/16/63] at ata0-master UDMA66
GEOM: create disk ad1 dp=0xc4831e60
ad1: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-slave UDMA66
acd0: CDROM <TOSHIBA CD-ROM XM-6202B> at ata1-master PIO4
Waiting 15 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
GEOM: create disk cd0 dp=0xc494b600
GEOM: create disk cd1 dp=0xc494ae00
cd1 at ata1 bus 0 target 0 lun 0
cd1: <TOSHIBA CD-ROM XM-6202B 1108> Removable CD-ROM SCSI-0 device 
cd1: 16.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
cd0 at sym0 bus 0 target 6 lun 0
cd0: <MATSHITA CD-R   CW-7502 4.17> Removable CD-ROM SCSI-2 device 
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Mounting root from ufs:/dev/ad0s2a
lock order reversal