Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2004-07-14 22:58:49
From: StRaVAGAnt
Description: Xp2600+,Nforce2,Sata 120,Freebsd 5.2.1-p9
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p9 #1: Wed Jul 14 16:16:21 CLT 2004
[_EMAIL_XXXXXXX]:/usr/obj/usr/src/sys/BSD
Preloaded elf kernel "/boot/kernel/kernel" at 0xc08e6000.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc08e6244.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc08e62f0.
Preloaded elf module "/boot/kernel/if_nv.ko" at 0xc08e639c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 2600+ (1913.20-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 536805376 (511 MB)
avail memory = 511770624 (488 MB)
mptable_probe: MP Config Table has bad signature: ^S^F
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00fdeb0
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <NVIDIA nForce2 AGP Controller> mem 0xd8000000-0xdbffffff at device 0.0 on pci0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xe0080000-0xe0080fff irq 5 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ugen0: vendor 0x041e Creative CardCam Value, rev 1.00/22.0b, addr 2
ohci1: <OHCI (generic) USB controller> mem 0xe0083000-0xe0083fff irq 10 at device 2.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pci0: <serial bus, USB> at device 2.2 (no driver attached)
nv0: <NVIDIA nForce MCP2 Networking Adapter> port 0xb000-0xb007 mem 0xe0087000-0xe0087fff irq 10 at device 4.0 on pci0
nv0: Ethernet address [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on nv0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <multimedia, audio> at device 5.0 (no driver attached)
pcm0: <Nvidia nForce2> port 0xb800-0xb87f,0xb400-0xb4ff mem 0xe0081000-0xe0081fff irq 11 at device 6.0 on pci0
pcm0: <Avance Logic ALC650 AC97 Codec>
pcib1: <PCIBIOS PCI-PCI bridge> at device 8.0 on pci0
pci1: <PCI bus> on pcib1
pci_cfgintr: 1:11 INTA BIOS irq 11
atapci0: <SiI 3112 SATA150 controller> port 0xa000-0xa00f,0x9c00-0x9c03,0x9800-0x9807,0x9400-0x9403,0x9000-0x9007 mem 0xdf000000-0xdf0001ff irq 11 at device 11.0 on pci1
atapci0: [MPSAFE]
ata2: at 0xdf000000 on atapci0
ata2: [MPSAFE]
ata3: at 0xdf000000 on atapci0
ata3: [MPSAFE]
atapci1: <nVidia nForce2 UDMA133 controller> port 0xf000-0xf00f at device 9.0 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
pci0: <serial bus, FireWire> at device 13.0 (no driver attached)
pcib2: <PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <display, VGA> at device 0.0 (no driver attached)
orm0: <Option ROMs> at iomem 0xd0000-0xd47ff,0xc0000-0xcf7ff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can`t assign resources (port)
unknown: <PNP0f13> can`t assign resources (irq)
unknown: <PNP0501> can`t assign resources (port)
unknown: <PNP0700> can`t assign resources (port)
unknown: <PNP0401> can`t assign resources (port)
unknown: <PNP0501> can`t assign resources (port)
Timecounter "TSC" frequency 1913195347 Hz quality 800
Timecounters tick every 10.000 msec
acd0: CDRW <LG CD-RW CED-8080B> at ata0-master PIO4
acd1: CDROM <GCR-8523B> at ata0-slave PIO4
GEOM: create disk ad4 dp=0xc47e2960
ad4: 114473MB <ST3120026AS> [232581/16/63] at ata2-master UDMA100
Mounting root from ufs:/dev/ad4s2a
nvidia0: <GeForce4 MX 440 with AGP8X> mem 0xd0000000-0xd7ffffff,0xdc000000-0xdcffffff irq 5 at device 0.0 on pci2
Warning: pid 519 used static ldt allocation.
See the i386_set_ldt man page for more info