Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2004-07-15 05:50:01
From: rocky
Description: HP DL360 G3
Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.10-STABLE #5: Fri May 28 13:28:07 CEST 2004 [_EMAIL_XXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/NS1 Timecounter "i8254" frequency 1193182 Hz CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2799.23-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 1073717248 (1048552K bytes) avail memory = 1041813504 (1017396K bytes) Programming 16 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 Programming 16 pins in IOAPIC #1 Programming 16 pins in IOAPIC #2 Programming 16 pins in IOAPIC #3 FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs cpu0 (BSP): apic id: 6, version: 0x00050014, at 0xfee00000 cpu1 (AP): apic id: 7, version: 0x00050014, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000 io1 (APIC): apic id: 3, version: 0x000f0011, at 0xfec01000 io2 (APIC): apic id: 4, version: 0x000f0011, at 0xfec02000 io3 (APIC): apic id: 5, version: 0x000f0011, at 0xfec03000 Preloaded elf kernel "kernel" at 0xc0341000. Warning: Pentium 4 CPU: PSE disabled Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard IOAPIC #1 intpin 15 -> irq 2 IOAPIC #1 intpin 7 -> irq 3 IOAPIC #1 intpin 6 -> irq 5 IOAPIC #0 intpin 10 -> irq 7 pci0: <PCI bus> on pcib0 pci0: <ATI Mach64-GR graphics accelerator> at 3.0 ciss0: <Compaq Smart Array 5i> port 0x2800-0x28ff mem 0xf5df0000-0xf5df3fff,0xf5f80000-0xf5fbffff irq 2 at device 4.0 on pci0 pci0: <unknown card> (vendor=0x0e11, dev=0xb203) at 5.0 irq 3 pci0: <unknown card> (vendor=0x0e11, dev=0xb204) at 5.2 irq 5 isab0: <PCI to ISA bridge (vendor=1166 device=0201)> at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks CSB5 ATA100 controller> port 0x2000-0x200f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <OHCI USB controller> at 15.2 irq 7 pcib1: <Host to PCI bridge> on motherboard IOAPIC #1 intpin 14 -> irq 10 pci1: <PCI bus> on pcib1 bge0: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf7ef0000-0xf7efffff irq 10 at device 2.0 on pci1 bge0: Ethernet address: [_MAC_XXXXXXXXXX] miibus0: <MII bus> on bge0 brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto pcib2: <Host to PCI bridge> on motherboard pci2: <PCI bus> on pcib2 pcib3: <Host to PCI bridge> on motherboard pci3: <PCI bus> on pcib3 pcib4: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard IOAPIC #1 intpin 13 -> irq 11 pci4: <PCI bus> on pcib4 bge1: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf7ff0000-0xf7ffffff irq 11 at device 2.0 on pci4 bge1: Ethernet address: [_MAC_XXXXXXXXXX] miibus1: <MII bus> on bge1 brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto pcib5: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard pci5: <PCI bus> on pcib5 eisa0: <EISA bus> on motherboard mainboard0: <CPQ0733 (System Board)> on eisa0 slot 0 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcd7ff,0xee000-0xeffff on isa0 pmtimer0 on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 SMP: AP CPU #1 Launched! acd0: CDROM <CRN-8245B> at ata0-master PIO4 Mounting root from ufs:/dev/da0s1a da0 at ciss0 bus 0 target 0 lun 0 da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-0 device da0: 135.168MB/s transfers da0: 34727MB (71122560 512 byte sectors: 255H 32S/T 8716C)