Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-07-18 17:15:22
From: chinfuzzy
Description: Pentium II, 233Mhz, file/email server
OpenBSD 2.9 (BLOOP) #16: Thu Jun 3 13:47:24 EDT 2004
root@bloop:/usr/src/sys/arch/i386/compile/BLOOP
cpu0: Intel Pentium II (Klamath) ("GenuineIntel" 686-class, 512KB L2 cache) 266
MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,MMX
real mem = 49917952 (48748K)
avail mem = 42491904 (41496K)
using 634 buffers containing 2596864 bytes (2536K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(43) BIOS, date 07/16/97, BIOS32 rev. 0 @ 0xf6dd0
apm0 at bios0: Power Management spec V1.2 (BIOS mgmt disabled)
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf6d20/0x990
pcibios0: PCI BIOS has 6 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 9 10 11
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4800
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 4 function 0 "Intel 82371SB PCI-ISA" rev 0x01
pciide0 at pci0 dev 4 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0 wi
red to compatibility, channel 1 wired to compatibility
atapiscsi0 at pciide0 channel 1
scsibus0 at atapiscsi0: 2 targets
sd0 at scsibus0 targ 0 lun 0: <IOMEGA, ZIP 250, 41.S> SCSI0 0/direct removable
sd0: 239MB, 239 cyl, 64 head, 32 sec, 512 bytes/sec, 489532 sec total
cd0 at scsibus0 targ 1 lun 0: <PHILIPS, PCRW804, 2,1> SCSI0 5/cdrom removable
pciide0: channel 1 interrupting at irq 15
sd0(pciide0:1:0): using PIO mode 0, DMA mode 1
cd0(pciide0:1:1): using PIO mode 4, DMA mode 2
pciide0: channel 1 interrupting at irq 15
sd0(pciide0:1:0): using PIO mode 0, DMA mode 1
cd0(pciide0:1:1): using PIO mode 4, DMA mode 2
vga1 at pci0 dev 7 function 0 "Matrox MGA Millennium II 2164W" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-7 added (80x25, vt100 emulation)
de0 at pci0 dev 10 function 0 "DEC DECchip 21041" rev 0x21: irq 11
de0: 21041 [10Mb/s] pass 2.1 address [_MAC_XXXXXXXXXX]
ahc0 at pci0 dev 12 function 0 "Adaptec AHA-2940U" rev 0x01: irq 10
ahc0: Wide Channel A, SCSI Id=7, 16/255 SCBs
scsibus1 at ahc0: 16 targets
de0: enabling 10baseT port
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 10.0MHz, offset = 0x8
sd1 at scsibus1 targ 0 lun 0: <COMPAQPC, MAE3043LP, 5911> SCSI2 0/direct fixed
sd1: 4094MB, 3708 cyl, 20 head, 113 sec, 512 bytes/sec, 8386000 sec total
ahc0: target 3 using 16bit transfers
ahc0: target 3 synchronous at 10.0MHz, offset = 0x8
sd2 at scsibus1 targ 3 lun 0: <SEAGATE, ST19171W SUN9.0G, 0776> SCSI2 0/direct f
ixed
sd2: 8637MB, 4926 cyl, 27 head, 133 sec, 512 bytes/sec, 17689267 sec total
ahc0: target 4 using 16bit transfers
ahc0: target 4 synchronous at 10.0MHz, offset = 0x8
sd3 at scsibus1 targ 4 lun 0: <SEAGATE, ST39102LCSUN9.0G, 0828> SCSI2 0/direct f
ixed
sd3: 8637MB, 4926 cyl, 27 head, 133 sec, 512 bytes/sec, 17689267 sec total
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 8440 netmask 8c40 ttymask 9cc2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: sd0 had no matching BIOS disk
dkcsum: sd1 matched BIOS disk 81
dkcsum: sd2 matched BIOS disk 80
dkcsum: sd3 matched BIOS disk 82
rootdev=0x420 rrootdev=0xd20 rawdev=0xd22
de0: enabling 10baseT port
de0: abnormal interrupt: receive process stopped