Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-07-25 19:15:59
From: hbent
Description: Dell PowerEdge 1400
NetBSD 2.0_BETA (INSTALL) #0: Sun Jul 18 01:51:26 UTC 2004
        xxx@xxx.xxx:/autobuild/netbsd-2-0/i386/OBJ/autobuild/netbsd
-2-0/src/sys/arch/i386/compile/INSTALL
total memory = 511 MB
avail memory = 491 MB
BIOS32 rev. 0 found at 0xffe90
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III (686-class), 993.37 MHz, id 0x68a
cpu0: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 383fbff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383fbff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 256 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1166 product 0x0009 (rev. 0x06)
pchb1 at pci0 dev 0 function 1
pchb1: vendor 0x1166 product 0x0009 (rev. 0x06)
pci1 at pchb1 bus 1
pci1: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ahc1 at pci1 dev 2 function 0: Adaptec aic7899 Ultra160 SCSI adapter
ahc1: interrupting at irq 10
ahc1: aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsibus0 at ahc1: 16 targets, 8 luns per target
ahc2 at pci1 dev 2 function 1: Adaptec aic7899 Ultra160 SCSI adapter
ahc2: interrupting at irq 11
ahc2: aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
scsibus1 at ahc2: 16 targets, 8 luns per target
vga1 at pci1 dev 6 function 0: vendor 0x10de product 0x0172 (rev. 0xa3)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
fxp0 at pci0 dev 2 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at irq 11
fxp0: Ethernet address xx:xx:xx:xx:xx:xx
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vendor 0x1102 product 0x0002 (audio multimedia, revision 0x08) at pci0 dev 4 fun
ction 0 not configured
vendor 0x1102 product 0x7002 (miscellaneous input, revision 0x08) at pci0 dev 4
function 1 not configured
vendor 0x1283 product 0x8212 (miscellaneous mass storage, revision 0x11) at pci0
 dev 6 function 0 not configured
vendor 0x1002 product 0x4752 (VGA display, revision 0x27) at pci0 dev 14 functio
n 0 not configured
pcib0 at pci0 dev 15 function 0
pcib0: vendor 0x1166 product 0x0200 (rev. 0x50)
rccide0 at pci0 dev 15 function 1
rccide0: ServerWorks OSB4 IDE Controller (rev. 0x00)
rccide0: bus-master DMA support present
rccide0: primary channel configured to compatibility mode
rccide0: primary channel interrupting at irq 14
atabus0 at rccide0 channel 0
rccide0: secondary channel configured to compatibility mode
rccide0: secondary channel interrupting at irq 15
atabus1 at rccide0 channel 1
ohci0 at pci0 dev 15 function 2: vendor 0x1166 product 0x0220 (rev. 0x04)
ohci0: interrupting at irq 5
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x1166 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug `n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug `n Play devices found
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
md0: internal 5000 KB image area
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <LITE-ON LTR-24102B, , 5S5A> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd1 at atapibus0 drive 1: <SAMSUNG DVD-ROM SD-604, , FT10> cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2
cd0(rccide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) (usi
ng DMA data transfers)
cd1(rccide0:0:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
uhub0: device problem, disabling port 2
sd0 at scsibus0 target 0 lun 0: <FUJITSU, MAN3184MP, 5507> disk fixed
sd0: 17366 MB, 29694 cyl, 2 head, 598 sec, 512 bytes/sect x 35566478 sectors
sd0: sync (12.50ns offset 127), 16-bit (160.000MB/s) transfers, tagged queueing