Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-07-26 15:12:42
From: hbent
Description: Power Macintosh G4/733 (4X AGP)
NetBSD 2.0_BETA (INSTALL) #0: Sun Jul 18 14:04:29 UTC 2004
[_EMAIL_XXXXXXXXXXXXXXX]:/autobuild/netbsd-2-0/macppc/OBJ/autobuild/netb
sd-2-0/src/sys/arch/macppc/compile/INSTALL
total memory = 256 MB
avail memory = 240 MB
mainbus0 (root)
cpu0 at mainbus0: 7450 (Revision 2.0), ID 0 (primary)
cpu0: HID0 8450c09c<EMCP,TBEN,NAP,DPM,ICE,DCE,SGE,LRSTK,FOLD,BHT>
cpu0: 733.34 MHz, 256KB L2 cache, 1MB no-parity L3 cache (DDR SRAM) at 4:1 ratio
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: vendor 0x106b product 0x002d (rev. 0x00)
ofb0 at pci0 dev 16 function 0: vendor 0x1002 product 0x5046
ofb0: 640 x 480, 8bpp
wsdisplay0 at ofb0 kbdmux 1: console (std, vt100 emulation)
wsmux1: connecting to wsdisplay0
uninorth1 at mainbus0
pci1 at uninorth1 bus 0
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: vendor 0x106b product 0x002e (rev. 0x00)
ahc0 at pci1 dev 19 function 0: Adaptec 2902/04/10/15/20/30C SCSI adapter
: unable to map registers
obio0 at pci1 dev 23 function 0: addr 0x80000000
zsc0 at obio0 offset 0x13000: irq 22,50
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
i2s at obio0 offset 0x10000 not configured
adb0 at obio0 offset 0x16000 irq 47: pm_adb_op: timeout. command = 0x0
0 targets
wdc0 at obio0 offset 0x1f000 irq 19: DMA transfer
atabus0 at wdc0 channel 0
wdc1 at obio0 offset 0x20000 irq 20: DMA transfer
atabus1 at wdc1 channel 0
wdc2 at obio0 offset 0x21000 irq 21: DMA transfer
atabus2 at wdc2 channel 0
ohci0 at pci1 dev 24 function 0: vendor 0x106b product 0x0019 (rev. 0x00)
ohci0: interrupting at irq 27
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x106b OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci1 dev 25 function 0: vendor 0x106b product 0x0019 (rev. 0x00)
ohci1: interrupting at irq 28
ohci1: OHCI version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x106b OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uninorth2 at mainbus0
pci2 at uninorth2 bus 0
pci2: i/o space, memory space enabled
pchb2 at pci2 dev 11 function 0
pchb2: vendor 0x106b product 0x002f (rev. 0x00)
vendor 0x11c1 product 0x5811 (Firewire serial bus, interface 0x10) at pci2 dev 1
4 function 0 not configured
gem0 at pci2 dev 15 function 0: vendor 0x106b product 0x0021 (rev. 0x01)
gem0: interrupting at irq 41
gem0: Ethernet address [_MAC_XXXXXXXXXX], 10KB RX fifo, 4KB TX fifo
brgphy0 at gem0 phy 0: BCM5401 1000BASE-T media interface, rev. 3
brgphy0: using BCM5401 DSP patch
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FD
X, auto
md0: internal 2048 KB image area
uhub2 at uhub1 port 1
uhub2: Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0, rev 1.10/
1.22, addr 2
uhub2: 3 ports with 2 removable, bus powered
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/1.22, addr 3, ic
lass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 1 configuration 1 interface 1
uhidev1: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/1.22, addr 3, ic
lass 3/0
uhidev1: 3 report ids
uhid at uhidev1 reportid 2 not configured
uhid at uhidev1 reportid 3 not configured
wd0 at atabus0 drive 0: <Maxtor 5T060H6>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 58644 MB, 119150 cyl, 16 head, 63 sec, 512 bytes/sect x 120103200 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) (using
DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <PIONEER DVD-RW DVR-103, , 1.90> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2
sd0 at atapibus0 drive 1: <IOMEGA ZIP 250 ATAPI, 80DB40F0A54B1A05, 41.S>
disk removable
sd0: drive offline
sd0: drive supports PIO mode 3, DMA mode 1, Ultra-DMA mode 2 (Ultra/33)
cd0(wdc1:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
sd0(wdc1:0:1): using PIO mode 3, DMA mode 1 (using DMA data transfers)
uhidev2 at uhub2 port 2 configuration 1 interface 0
uhidev2: Fellowes, Inc. Web Pro Optical, rev 1.01/0.01, addr 4, iclass 3/1
uhid at uhidev2 not configured