Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2004-07-30 00:36:29
From: BSD TECH
Description: i86 - P3 933mhz
NetBSD 2.0_BETA (GENERIC) #0: Mon Apr 26 19:27:04 EDT 2004 [_EMAIL_XXXXXXXXXXXX]:/u1/buildspace/build-i386-20040426-1652/obj/usr/src/sys/arch/i386/compile/GENERIC total memory = 255 MB avail memory = 242 MB BIOS32 rev. 0 found at 0xf0700 mainbus0 (root) cpu0 at mainbus0: (uniprocessor) cpu0: Intel Pentium III (686-class), 931.03 MHz, id 0x686 cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR> cpu0: features 383f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX> cpu0: features 383f9ff<FXSR,SSE> cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way cpu0: L2 cache 256 KB 32b/line 8-way cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way cpu0: 8 page colors pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: VIA Technologies VT82C691 (Apollo Pro) Host-PCI (rev. 0xc4) agp0 at pchb0: aperture at 0xfe000000, size 0xe400000 ppb0 at pci0 dev 1 function 0: VIA Technologies VT82C598 (Apollo MVP3) CPU-AGP Bridge (rev. 0x00) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled vga1 at pci1 dev 0 function 0: Nvidia Corporation RIVA TNT2 Model 64 (rev. 0x15) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 pcib0 at pci0 dev 4 function 0 pcib0: VIA Technologies VT82C686A (Apollo KX133) PCI-ISA Bridge (rev. 0x22) viaide0 at pci0 dev 4 function 1 viaide0: VIA Technologies VT82C686A (Apollo KX133) ATA66 controller viaide0: bus-master DMA support present viaide0: primary channel configured to compatibility mode viaide0: primary channel interrupting at irq 14 atabus0 at viaide0 channel 0 viaide0: secondary channel configured to compatibility mode viaide0: secondary channel interrupting at irq 15 atabus1 at viaide0 channel 1 pchb1 at pci0 dev 4 function 4 pchb1: VIA Technologies VT82C686A SMBus Controller (rev. 0x30) eap0 at pci0 dev 5 function 0: Ensoniq CT5880 CT5880-D (rev. 0x03) eap0: interrupting at irq 5 eap0: ac97: SigmaTel STAC9721/23 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D eap0: ac97: ext id 200<AMAP> audio0 at eap0: full duplex, mmap, independent midi0 at eap0: AudioPCI MIDI UART Cirrus Logic CL-GD5430 (VGA display, revision 0x2d) at pci0 dev 9 function 0 not configured rtk0 at pci0 dev 10 function 0: D-Link Systems DFE 530TX+ rtk0: interrupting at irq 4 rtk0: Ethernet address [_MAC_XXXXXXXXXX] ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface ukphy0: OUI 0x000000, model 0x0000, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi1 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug `n Play device support npx0 at isa0 port 0xf0-0xff: using exception 16 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 isapnp0: no ISA Plug `n Play devices found got probe interrupt got probe interrupt fdprobe: got intr fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec got probe interrupt fdprobe: got intr Kernelized RAIDframe activated wd0 at atabus0 drive 0: <ST320413A> wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 19092 MB, 38792 cyl, 16 head, 63 sec, 512 bytes/sect x 39102336 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA data transfers) atapibus0 at atabus1: 2 targets cd0 at atapibus0 drive 0: <MATSHITADVD-ROM SR-8586, , 3Y19> cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd1 at atapibus0 drive 1: <LITE-ON LTR-48125S, , 1S05> cdrom removable cd1: 32-bit data port viaide0:1:1: lost interrupt type: ata tc_bcount: 0 tc_skip: 0 cd1: drive supports PIO mode 4viaide0:1:1: lost interrupt type: ata tc_bcount: 0 tc_skip: 0 , DMA mode 2viaide0:1:1: lost interrupt type: ata tc_bcount: 0 tc_skip: 0 , Ultra-DMA mode 2 (Ultra/33) cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers) cd1(viaide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers) boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs wsdisplay0: screen 1 added (80x25, vt100 emulation)