Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-08-02 09:08:14
From: dilmah
Description: Dual board ASUS P2B-DS; 2 Pentium-III 550MHz processors; 896Mb RAM
NetBSD 2.0G (FLAMANTE) #0: Mon Aug 2 11:17:09 MSD 2004 [_EMAIL_XXXXXXXXXXXXXXXXX]:/volatile/worksrc/netbsd-current/src/sys/arch/i386/compile/FLAMANTE total memory = 895 MB avail memory = 869 MB BIOS32 rev. 0 found at 0xf0530 mainbus0 (root) mainbus0: scanning 0x9fc00 to 0x9fff0 for MP signature mainbus0: scanning 0x9f800 to 0x9fbf0 for MP signature mainbus0: scanning 0xf0000 to 0xffff0 for MP signature mainbus0: MP floating pointer found in bios at 0xf6ef0 mainbus0: MP config table at 0xf6ae4, 252 bytes long mainbus0: Intel MP Specification (Version 1.1) (OEM00000 PROD00000000) cpu0 at mainbus0: apid 1 (boot processor) cpu0: Intel Pentium III (686-class), 551.29 MHz, id 0x673 cpu0: features 387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR> cpu0: features 387fbff<PGE,MCA,CMOV,PAT,PSE36,PN,MMX> cpu0: features 387fbff<FXSR,SSE> cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way cpu0: L2 cache 512 KB 32B/line 4-way cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way cpu0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXXXXXXX] cpu0: calibrating local timer cpu0: apic clock running at 100 MHz cpu0: 32 page colors cpu0: kstack at 0xcb3c0000 for 16384 bytes cpu0: idle pcb at 0xcb3c0000, idle sp at 0xcb3c3f98 cpu1 at mainbus0: apid 0 (application processor) cpu1: starting cpu1: Intel Pentium III (686-class), 551.25 MHz, id 0x673 cpu1: features 387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR> cpu1: features 387fbff<PGE,MCA,CMOV,PAT,PSE36,PN,MMX> cpu1: features 387fbff<FXSR,SSE> cpu1: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way cpu1: L2 cache 512 KB 32B/line 4-way cpu1: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative cpu1: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way cpu1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXXXXXXX] cpu1: kstack at 0xcb3cc000 for 16384 bytes cpu1: idle pcb at 0xcb3cc000, idle sp at 0xcb3cff98 mpbios: bus 0 is type PCI mpbios: bus 1 is type PCI mpbios: bus 2 is type ISA ioapic0 at mainbus0 apid 2 (I/O APIC) ioapic0: pa 0xfec00000, virtual wire mode, version 11, 24 pins ioapic0: int0 attached to ExtINT (type 3<type=3=ExtINT> flags 0<pol=0,trig=0>) ioapic0: int1 attached to isa0 irq 1 (type 0<type=0> flags 0<pol=0,trig=0>) ioapic0: int2 attached to isa0 irq 0 (type 0<type=0> flags 0<pol=0,trig=0>) ioapic0: int3 attached to isa0 irq 3 (type 0<type=0> flags 0<pol=0,trig=0>) ioapic0: int4 attached to isa0 irq 4 (type 0<type=0> flags 0<pol=0,trig=0>) ioapic0: int5 attached to isa0 irq 5 (type 0<type=0> flags 0<pol=0,trig=0>) ioapic0: int6 attached to isa0 irq 6 (type 0<type=0> flags 0<pol=0,trig=0>) ioapic0: int7 attached to isa0 irq 7 (type 0<type=0> flags 0<pol=0,trig=0>) ioapic0: int8 attached to isa0 irq 8 (type 0<type=0> flags 0<pol=0,trig=0>) ioapic0: int9 attached to isa0 irq 9 (type 0<type=0> flags 0<pol=0,trig=0>) ioapic0: int12 attached to isa0 irq 12 (type 0<type=0> flags 0<pol=0,trig=0>) ioapic0: int14 attached to isa0 irq 14 (type 0<type=0> flags 0<pol=0,trig=0>) ioapic0: int15 attached to isa0 irq 15 (type 0<type=0> flags 0<pol=0,trig=0>) ioapic0: int16 attached to isa0 irq 11 (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) ioapic0: int19 attached to isa0 irq 10 (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>) local apic: int0 attached to ExtINT (type 3<type=3=ExtINT> flags 5<pol=1=Act Hi,trig=1=Edge>) local apic: int1 attached to NMI (type 1<type=1=NMI> flags 5<pol=1=Act Hi,trig=1=Edge>) pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x03) agp0 at pchb0: aperture at 0xe4000000, size 0x4000000 ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x03) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled vga1 at pci1 dev 0 function 0: S3 Trio3D/2X (rev. 0x02) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 pcib0 at pci0 dev 4 function 0 pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02) piixide0 at pci0 dev 4 function 1 piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01) piixide0: bus-master DMA support present piixide0: primary channel wired to compatibility mode piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14) atabus0 at piixide0 channel 0 piixide0: secondary channel wired to compatibility mode piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15) atabus1 at piixide0 channel 1 uhci0 at pci0 dev 4 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01) uhci0: interrupting at ioapic0 pin 19 (irq 10) usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x02) at pci0 dev 4 function 3 not configured Adaptec (2nd PCI Vendor ID) AIC-7890/1 U2 (SCSI mass storage) at pci0 dev 6 function 0 not configured ex0 at pci0 dev 12 function 0: 3Com 3c905-TX 10/100 Ethernet (rev. 0x0) ex0: interrupting at ioapic0 pin 16 (irq 11) ex0: MAC address [_MAC_XXXXXXXXXX] exphy0 at ex0 phy 24: 3Com internal media interface exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 lm0 at isa0 port 0x290-0x297: W83781D pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker spkr0 at pcppi0 sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug `n Play device support npx0 at isa0 port 0xf0-0xff: using exception 16 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 isapnp0: read port 0x203 sb1 at isapnp0 port 0x220/16 irq 5 drq 1,0 sb1: PnP Sound Chip : dsp v4.02 audio0 at sb1: half duplex, mmap, independent midi1 at sb1: SB MIDI UART opl0 at sb1: model OPL3 midi2 at opl0: SB Yamaha OPL3 isapnp0: <PnP Sound Chip, @H@1001, , > port 0x388/8 not configured isapnp0: <PnP Sound Chip, @P@1001, , > port 0x200/8 not configured isapnp0: <PnP Sound Chip, @X@1001, , > port 0x330/2 irq 9 not configured apm0 at mainbus0: Power Management spec V1.2 APM power mgmt engage (device 1): power management disabled (0x10f) apm0: A/C state: on apm0: battery charge state: no battery cpu0: prelint0 8700<vector=0,delmode=7,level,dest=0> 0<target=0> cpu0: prelint1 400<vector=0,delmode=4,dest=0> 0<target=0> cpu0: timer0 300c0<vector=c0,delmode=0,masked,dest=0> 0<target=0> cpu0: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0> cpu0: lint0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0> cpu0: lint1 400<vector=0,delmode=4,dest=0> 0<target=0> cpu0: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0> ioapic0: enabling ioapic0: int1 191<vector=91,delmode=1,dest=0> 1000000<target=1> ioapic0: int3 1d1<vector=d1,delmode=1,dest=0> 1000000<target=1> ioapic0: int4 1d0<vector=d0,delmode=1,dest=0> 1000000<target=1> ioapic0: int5 1b0<vector=b0,delmode=1,dest=0> 1000000<target=1> ioapic0: int6 163<vector=63,delmode=1,dest=0> 1000000<target=1> ioapic0: int7 190<vector=90,delmode=1,dest=0> 1000000<target=1> ioapic0: int12 192<vector=92,delmode=1,dest=0> 1000000<target=1> ioapic0: int14 160<vector=60,delmode=1,dest=0> 1000000<target=1> ioapic0: int15 161<vector=61,delmode=1,dest=0> 1000000<target=1> ioapic0: int16 a170<vector=70,delmode=1,actlo,level,dest=0> 1000000<target=1> ioapic0: int19 a162<vector=62,delmode=1,actlo,level,dest=0> 1000000<target=1> fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec Kernelized RAIDframe activated vinum: loaded IPsec: Initialized Security Association Processing. atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: <CD-W540E, , 1.0D> cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) wd0 at atabus0 drive 0: <SAMSUNG SV0761D> wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 7299 MB, 14830 cyl, 16 head, 63 sec, 512 bytes/sect x 14948640 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers) cd0(piixide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers) wd1 at atabus1 drive 0: <MAXTOR 6L080J4> wd1: drive supports 16-sector PIO transfers, LBA addressing wd1: 76345 MB, 155114 cyl, 16 head, 63 sec, 512 bytes/sect x 156355584 sectors wd1: 32-bit data port wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd1(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers) boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs cpu1: prelint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0> cpu1: prelint1 10000<vector=0,delmode=0,masked,dest=0> 0<target=0> cpu1: timer0 200c0<vector=c0,delmode=0,dest=0> 0<target=0> cpu1: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0> cpu1: lint0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0> cpu1: lint1 400<vector=0,delmode=4,dest=0> 0<target=0> cpu1: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0> cpu1: CPU 0 running wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) wsdisplay0: screen 5 added (80x25, vt100 emulation) wsdisplay0: screen 6 added (80x25, vt100 emulation) wsdisplay0: screen 7 added (80x25, vt100 emulation) Accounting started