Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-08-09 02:22:16
From: obirt
Description: DEC Alpha AXPpci33 21066 166MHz before sending it off to a new owner.
[ using 558816 bytes of netbsd ELF symbol table ]
consinit: not using prom console
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6.1 (GENERIC) #0: Mon Apr  7 07:59:37 UTC 2003
    xxx@xxx.xxx:/autobuilder/build/netbsd-1-6/alpha/OBJ/autobuilder/build/netbsd-1-6/src/sys/arch/alpha/compile/GENERIC
Alpha PC AXPpci33, 166MHz, s/n 
8192 byte page size, 1 processor.
total memory = 32768 KB
(2016 KB reserved for PROM, 30752 KB used by NetBSD)
avail memory = 21328 KB
using 205 buffers containing 1640 KB of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), LCA-2 (21066)

cpu0: Architecture extensions: fffffc00008c92a8<PAT>
lca0 at mainbus0
pci0 at lca0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
siop0 at pci0 dev 6 function 0: Symbios Logic 53c810 (fast scsi)
siop0: interrupting at isa irq 11
scsibus0 at siop0: 8 targets, 8 luns per target
sio0 at pci0 dev 7 function 0: Intel 82378ZB System I/O (SIO) (rev. 0x03)
rtk0 at pci0 dev 11 function 0: RealTek 8139 10/100BaseTX
rtk0: interrupting at isa irq 5
rtk0: Ethernet address xx:xx:xx:xx:xx:xx
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
yds0 at pci0 dev 12 function 0: Yamaha 724F (DS-1) Audio (rev. 0x03)
yds0: interrupting at isa irq 9
yds0: TXN3 codec; 18 bit DAC, 18 bit ADC, no 3D stereo
audio0 at yds0: full duplex, mmap, independent
isa0 at sio0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux ignored): console keyboard
vga0 at isa0 port 0x3b0-0x3df iomem 0xa0000-0xbffff
wsdisplay0 at vga0 (kbdmux ignored): console (80x25, vt100 emulation), using wskbd0
lpt0 at isa0 port 0x3bc-0x3bf irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
isabeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
opl0 at yds0: model OPL3
midi1 at opl0: DS-1 integrated Yamaha OPL3
mpu0 at yds0
midi2 at mpu0: Yamaha DS-1 MIDI UART
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <COMPAQPC, ST32430N, 0554> SCSI2 0/direct fixed
sd0: 2006 MB, 3992 cyl, 9 head, 114 sec, 512 bytes/sect x 4110000 sectors
sd0: sync (100.0ns offset 8), 8-bit (10.000MB/s) transfers
cd0 at scsibus0 target 4 lun 0: <PIONEER, CD-ROM DR-U12X, 1.06> SCSI2 5/cdrom removable
cd0: sync (100.0ns offset 8), 8-bit (10.000MB/s) transfers
Kernelized RAIDframe activated
root on sd0a dumps on sd0b
root file system type: ffs
cd0: no disk label
set{u,g}id pid 395 (lpc) was invoked by uid 0 ppid 394 (sh) with fd 0 closed