Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-08-10 08:01:37
From: vagina
Description: 2xPentiumII with 400 MHz :) and Raid
NetBSD 1.6ZK (ZAMP) #0: Thu Mar 18 11:04:00 CET 2004
        xxx@xxx.xxx:/usr/src/sys/arch/i386/compile/ZAMP
total memory = 255 MB
avail memory = 239 MB
BIOS32 rev. 0 found at 0xf0530
mainbus0 (root)
mainbus0: scanning 0x9f400 to 0x9f7f0 for MP signature
mainbus0: scanning 0x9f000 to 0x9f3f0 for MP signature
mainbus0: scanning 0xf0000 to 0xffff0 for MP signature
mainbus0: MP floating pointer found in bios at 0xf6e60
mainbus0: MP config table at 0xf6a50, 260 bytes long
mainbus0: Intel MP Specification (Version 1.4) (OEM00000 PROD00000000)
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: Intel Pentium II (686-class), 400.93 MHz, id 0x653
cpu0: features 183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 183fbff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 183fbff<FXSR>
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu0: L2 cache 512 KB 32b/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: calibrating local timer
cpu0: apic clock running at 100 MHz
cpu0: 32 page colors
cpu0: kstack at 0xc699a000 for 16384 bytes
cpu0: idle pcb at 0xc699a000, idle sp at 0xc699df98
cpu1 at mainbus0: apid 0 (application processor)
cpu1: starting
cpu1: Intel Pentium II (686-class), 400.91 MHz, id 0x653
cpu1: features 183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features 183fbff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu1: features 183fbff<FXSR>
cpu1: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu1: L2 cache 512 KB 32b/line 4-way
cpu1: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu1: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu1: kstack at 0xc6a28000 for 16384 bytes
cpu1: idle pcb at 0xc6a28000, idle sp at 0xc6a2bf98
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type ISA
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, virtual wire mode, version 11, 24 pins
ioapic0: int0 attached to ExtINT (type 3<type=3=ExtINT> flags 0<pol=0,trig=0>)
ioapic0: int1 attached to isa0 irq 1 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int2 attached to isa0 irq 0 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int3 attached to isa0 irq 3 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int4 attached to isa0 irq 4 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int5 attached to isa0 irq 5 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int6 attached to isa0 irq 6 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int7 attached to isa0 irq 7 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int8 attached to isa0 irq 8 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int9 attached to isa0 irq 9 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int12 attached to isa0 irq 12 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int16 attached to pci1 device 0 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: int19 attached to pci0 device 4 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: int19 attached to pci0 device 6 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: int18 attached to pci0 device 10 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: int17 attached to pci0 device 11 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
local apic: int0 attached to ExtINT (type 3<type=3=ExtINT> flags 5<pol=1=Act Hi,trig=1=Edge>)
local apic: int1 attached to NMI (type 1<type=1=NMI> flags 5<pol=1=Act Hi,trig=1=Edge>)
mainbus0: MP WARNING: 124 bytes of extended entries not examined
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x03)
agp0 at pchb0: aperture at 0xe4000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies 3D Rage IIC (AGP) (rev. 0x7a)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 4 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
piixide0 at pci0 dev 4 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: device disabled (at device)
uhci0 at pci0 dev 4 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: interrupting at ioapic0 pin 19 (irq 255)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x02) at pci0 dev 4 function 3 not configur
ed
ahc1 at pci0 dev 6 function 0: Adaptec aic7890/91 Ultra2 SCSI adapter
ahc1: interrupting at ioapic0 pin 19 (irq 14)
ahc1: aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsibus0 at ahc1: 16 targets, 8 luns per target
ex0 at pci0 dev 10 function 0: 3Com 3c905B-TX 10/100 Ethernet (rev. 0x30)
ex0: interrupting at ioapic0 pin 18 (irq 15)
ex0: MAC address xx:xx:xx:xx:xx:xx
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
icp0 at pci0 dev 11 function 0: pci_mem_find: expected mem type 00000000, found 00000002
ICP-Vortex RAID controller
icp0: interrupting at ioapic0 pin 17 (irq 10)
icp0: model <GDT6518RD>, firmware <RAIDYNE>, 2 channel(s), 64MB memory
icpsp0 at icp0 unit 100: physical SCSI channel 0
scsibus1 at icpsp0: 16 targets, 8 luns per target
icpsp1 at icp0 unit 101: physical SCSI channel 1
scsibus2 at icpsp1: 16 targets, 8 luns per target
ld0 at icp0 unit 0: <DISK_A0>, type: JBOD, status: optimal
ld0: 34990 MB, 8886 cyl, 128 head, 63 sec, 512 bytes/sect x 71659520 sectors
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug `n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug `n Play devices found
cpu0: prelint0 8700<vector=0,delmode=7,level,dest=0> 0<target=0>
cpu0: prelint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu0: timer0 300c0<vector=c0,delmode=0,masked,dest=0> 0<target=0>
cpu0: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu0: lint0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0>
cpu0: lint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu0: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: enabling
ioapic0: int1 191<vector=91,delmode=1,dest=0> 1000000<target=1>
ioapic0: int3 1d1<vector=d1,delmode=1,dest=0> 1000000<target=1>
ioapic0: int4 1d0<vector=d0,delmode=1,dest=0> 1000000<target=1>
ioapic0: int6 162<vector=62,delmode=1,dest=0> 1000000<target=1>
ioapic0: int7 190<vector=90,delmode=1,dest=0> 1000000<target=1>
ioapic0: int12 192<vector=92,delmode=1,dest=0> 1000000<target=1>
ioapic0: int17 a161<vector=61,delmode=1,actlo,level,dest=0> 1000000<target=1>
ioapic0: int18 a170<vector=70,delmode=1,actlo,level,dest=0> 1000000<target=1>
ioapic0: int19 a160<vector=60,delmode=1,actlo,level,dest=0> 1000000<target=1>
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
raidattach: Asked for 8 units
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
st0 at scsibus0 target 5 lun 0: <HP, C1537A, L105> tape removable
st0: drive empty
st0: sync (100.00ns offset 32), 8-bit (10.000MB/s) transfers
cd0 at scsibus0 target 6 lun 0: <TEAC, CD-ROM CD-532S, 1.0A> cdrom removable
cd0: sync (50.00ns offset 16), 8-bit (20.000MB/s) transfers
Searching for RAID components...
boot device: ld0
root on ld0a dumps on ld0b
mountroot: trying smbfs...
mountroot: trying coda...
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying ntfs...
mountroot: trying nfs...
mountroot: trying lfs...
mountroot: trying ext2fs...
mountroot: trying ffs...
root file system type: ffs
cpu1: prelint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: prelint1 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: timer0 200c0<vector=c0,delmode=0,dest=0> 0<target=0>
cpu1: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: lint0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0>
cpu1: lint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu1: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: CPU 0 running
init: copying out path `/sbin/init` 11