Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2004-08-26 03:44:21
From: ruben
Description: asus b1 laptop i386 http://bolink.org
OpenBSD 3.4 (GENERIC) #18: Wed Sep 17 03:34:47 MDT 2003
    xxx@xxx.xxx:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class) 997 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD
real mem  = 259604480 (253520K)
avail mem = 234598400 (229100K)
using 3194 buffers containing 13082624 bytes (12776K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(c2) BIOS, date 10/29/01, BIOS32 rev. 0 @ 0xf0a70
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x1262
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf11e0/128 (6 entries)
pcibios0: PCI Exclusive IRQs: 11
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8231 PCI-ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xc000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8605 Host-PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8605 PCI-AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "S3 Twister" rev 0x02
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cbb0 at pci0 dev 15 function 0 "O2 Micro OZ6933 CardBus" rev 0x02: irq 11
cbb1 at pci0 dev 15 function 1 "O2 Micro OZ6933 CardBus" rev 0x02: irq 11
vendor "PCTEL", unknown product 0x7892 (class communications subclass modem, rev 0x02) at pci0 dev 16 function 0 not configured
pcib0 at pci0 dev 17 function 0 "VIA VT8231 PCI-ISA" rev 0x10
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA100, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N020ATDA04-0>
wd0: 16-sector PIO, LBA, 19077MB, 16383 cyl, 16 head, 63 sec, 39070080 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA330, 1.01> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 17 function 2 "VIA VT83C572 USB" rev 0x1e: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 17 function 3 "VIA VT83C572 USB" rev 0x1e: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
vendor "VIA", unknown product 0x8235 (class bridge subclass miscellaneous, rev 0x10) at pci0 dev 17 function 4 not configured
auvia0 at pci0 dev 17 function 5 "VIA VT82C686 AC97 Audio" rev 0x40: irq 9
ac97: codec id 0x43525934 (Cirrus Logic CS4299 rev 4)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
audio0 at auvia0
dc0 at pci0 dev 18 function 0 "Davicom Technologies DM9102" rev 0x31: irq 9, address xx:xx:xx:xx:xx:xx
amphy0 at dc0 phy 1: Am79C873 10/100 media interface, rev. 0
"Texas Instruments TSB43AB22 FireWire" rev 0x00 at pci0 dev 19 function 0 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia1 at cardslot1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask c800 netmask ca00 ttymask da82
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
wi0 at pcmcia1 function 0 "Intersil, PRISM 2_5 PCMCIA ADAPTER, ISL37300P" port 0xc000/64
wi0: PRISM2.5 ISL3873, Firmware 1.0.7 (primary), 1.3.5 (station), address xx:xx:xx:xx:xx:xx
ugen0 at uhub1 port 2
ugen0: AuthenTec product 0x5500, rev 1.10/0.00, addr 2