Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-09-20 19:11:44
From: obirt
Description: Dell PowerEdge 4300 dual PIII/500 443GX board. Note how the pre 1.0 spec usb controller can`t map it`s iospace. Pretty crude bios hack to disable it.
NetBSD 2.0_BETA (GENERIC.MP) #0: Fri Sep 17 15:59:19 UTC 2004 [_EMAIL_XXXXXXXXXXXXXXX]:/autobuild/netbsd-2-0/i386/OBJ/autobuild/netbsd-2-0/src/sys/arch/i386/compile/GENERIC.MP total memory = 767 MB avail memory = 743 MB BIOS32 rev. 0 found at 0xffe90 mainbus0 (root) mainbus0: Intel MP Specification (Version 1.4) (DELL PowerEdge 7C) cpu0 at mainbus0: apid 1 (boot processor) cpu0: Intel Pentium III (686-class), 497.45 MHz, id 0x672 cpu0: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR> cpu0: features 383fbff<PGE,MCA,CMOV,PAT,PSE36,MMX> cpu0: features 383fbff<FXSR,SSE> cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way cpu0: L2 cache 512 KB 32B/line 4-way cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way cpu0: calibrating local timer cpu0: apic clock running at 99 MHz cpu0: 32 page colors cpu1 at mainbus0: apid 0 (application processor) cpu1: starting cpu1: Intel Pentium III (686-class), 497.43 MHz, id 0x672 cpu1: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR> cpu1: features 383fbff<PGE,MCA,CMOV,PAT,PSE36,MMX> cpu1: features 383fbff<FXSR,SSE> cpu1: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way cpu1: L2 cache 512 KB 32B/line 4-way cpu1: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative cpu1: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way mpbios: bus 0 is type PCI mpbios: bus 1 is type PCI mpbios: bus 2 is type PCI mpbios: bus 3 is type PCI mpbios: bus 4 is type ISA ioapic0 at mainbus0 apid 2 (I/O APIC) ioapic0: pa 0xfec00000, version 11, 24 pins ioapic0: misconfigured as apic 0 ioapic0: remapped to apic 2 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: Intel 82443GX Host Bridge/Controller (rev. 0x00) agp0 at pchb0: aperture at 0xec000000, size 0x4000000 ppb0 at pci0 dev 1 function 0: Intel 82443GX AGP Interface (rev. 0x00) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled vga1 at pci1 dev 0 function 0: ATI Technologies 3D Rage Pro (AGP 1x) (rev. 0x5c) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 ppb1 at pci0 dev 2 function 0: Digital Equipment DECchip 21152 PCI-PCI Bridge (rev. 0x03) pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled, rd/line, wr/inv ok ahc1 at pci2 dev 4 function 0: Adaptec aic7890/91 Ultra2 SCSI adapter ahc1: interrupting at ioapic0 pin 16 (irq 11) ahc1: aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs scsibus0 at ahc1: 16 targets, 8 luns per target ahc2 at pci2 dev 6 function 0: Adaptec aic7860 Ultra SCSI adapter ahc2: interrupting at ioapic0 pin 16 (irq 11) ahc2: aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs scsibus1 at ahc2: 8 targets, 8 luns per target ppb2 at pci2 dev 10 function 0: Intel product 0x0960 (rev. 0x03) pci3 at ppb2 bus 3 pci3: i/o space, memory space enabled, rd/line, wr/inv ok iop0 at pci2 dev 10 function 1: I2O adapter <MegaRAID> iop0: interrupting at ioapic0 pin 18 (irq 10) pcib0 at pci0 dev 7 function 0 pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02) piixide0 at pci0 dev 7 function 1 piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01) piixide0: device disabled (at device) uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01) uhci0: can`t map i/o space Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x02) at pci0 dev 7 function 3 not configured fxp0 at pci0 dev 8 function 0: i82558 Ethernet, rev 5 fxp0: interrupting at ioapic0 pin 20 (irq 14) fxp0: Ethernet address [_MAC_XXXXXXXXXX] inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug `n Play device support npx0 at isa0 port 0xf0-0xff: using exception 16 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 isapnp0: no ISA Plug `n Play devices found ioapic0: enabling iop0: configuring... device (class 0xffffffff) at iop0 tid 0 not configured ld0 at iop0 tid 16: <I2O, RAID5, 1.00> direct access, fixed, 2048kB cache ld0: 17136 MB, 8704 cyl, 64 head, 63 sec, 512 bytes/sect x 35094528 sectors ld1 at iop0 tid 17: <I2O, RAID1, 1.00> direct access, fixed, 2048kB cache ld1: 8568 MB, 4352 cyl, 64 head, 63 sec, 512 bytes/sect x 17547264 sectors fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec Kernelized RAIDframe activated scsibus0: waiting 2 seconds for devices to settle... scsibus1: waiting 2 seconds for devices to settle... cd0 at scsibus1 target 5 lun 0: <NEC, CD-ROM DRIVE:465, 1.25> cdrom removable cd0: sync (50.00ns offset 15), 8-bit (20.000MB/s) transfers boot device: ld0 root on ld0a dumps on ld0b root file system type: ffs cpu1: CPU 0 running wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)