Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

Date: 2004-11-25 01:30:44
From: obirt
Description: K6-2 SIS with 3dfx Voodoo 5
NetBSD 2.0_RC5 (GENERIC) #0: Sat Nov 13 06:15:03 EST 2004
        tinderbox@beastie:/data1/tinderbox/release-x11/netbsd-2-0/obj/sys/arch/i
386/compile/GENERIC
total memory = 375 MB
avail memory = 359 MB
BIOS32 rev. 0 found at 0xfb4a0
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD K6-2 (586-class), 475.93 MHz, id 0x58c
cpu0: features 8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
cpu0: features 8021bf<PGE,MMX>
cpu0: I-cache 32 KB 32B/line 2-way, D-cache 32 KB 32B/line 2-way
cpu0: ITLB 64 4 KB entries direct-mapped
cpu0: DTLB 128 4 KB entries 2-way
cpu0: 4 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Silicon Integrated System 530 Host to PCI Bridge (rev. 0x02)
agp0 at pchb0: aperture at 0xe0000000, size 0x2000000
siside0 at pci0 dev 0 function 1
siside0: Silicon Integrated System 530 IDE controller (rev. 0xd0)
siside0: bus-master DMA support present
siside0: primary channel wired to compatibility mode
siside0: primary channel interrupting at irq 14
atabus0 at siside0 channel 0
siside0: secondary channel wired to compatibility mode
siside0: secondary channel interrupting at irq 15
atabus1 at siside0 channel 1
pcib0 at pci0 dev 1 function 0
pcib0: Silicon Integrated System 85C503 or 5597/5598 ISA bridge (rev. 0xb1)
Silicon Integrated System 600 Power Mngmt Controller (undefined subclass 0x00) a
t pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 1 function 2: Silicon Integrated System 5597/5598 USB host con
troller (rev. 0x11)
ohci0: interrupting at irq 5
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ppb0 at pci0 dev 2 function 0: Silicon Integrated System 86C201 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: no spaces enabled!
vga1 at pci0 dev 9 function 0: 3Dfx Interactive Voodoo 4/5 (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ex0 at pci0 dev 13 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 0
x74)
ex0: interrupting at irq 10
ex0: MAC address [_MAC_XXXXXXXXXX]
bmtphy0 at ex0 phy 24: Broadcom 3c905C internal PHY, rev. 6
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
eso0 at pci0 dev 15 function 0: ESS Solo-1 PCI AudioDrive ES1946
eso0: interrupting at irq 12
audio0 at eso0: full duplex, mmap, independent
opl0 at eso0: model OPL3
midi0 at opl0: ESO Yamaha OPL3
mpu0 at eso0
midi1 at mpu0: ESO MPU-401 MIDI UART
joy0 at eso0
joy0: joystick not connected
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi2 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug `n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug `n Play devices found
eso0: mapping Audio 1 DMA using I/O space at 0x410
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Logitech Trackball, rev 1.10/2.20, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 2 configuration 1 interface 0
uhidev1: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub0 port 2 configuration 1 interface 1
uhidev2: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/0
uhidev2: 3 report ids
uhid0 at uhidev2 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
ums1 at uhidev2 reportid 3: 0 buttons and Z dir.
wsmouse1 at ums1 mux 0
wd0 at atabus0 drive 0: <QUANTUM FIREBALL CX6.8A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 6532 MB, 14158 cyl, 15 head, 63 sec, 512 bytes/sect x 13379310 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(siside0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA data
transfers)
wd1 at atabus1 drive 0: <Maxtor 91360U4>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 12982 MB, 26377 cyl, 16 head, 63 sec, 512 bytes/sect x 26588016 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd1(siside0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA data
transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)