Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-11-27 08:08:17
From: herauthon
Description: Compaq Proliant 1500 Pentium 1 - 100Mhz Socket 5 Onboard 80MB - addressed only 16Mb Bought for 3.5eu [bisbis]
NetBSD 2.0_RC5 (GENERIC) #0: Sat Nov 13 06:28:51 CET 2004 tecneeq@ascent:/home/tecneeq/builds/NetBSD-2.0_RC5-i386-obj/sys/arch/i386/compile/GENERIC total memory = 15996 KB <== (while 80mb inside) avail memory = 7944 KB BIOS32 rev. 0 found at 0xf0000 mainbus0 (root) cpu0 at mainbus0: (uniprocessor) cpu0: Intel Pentium (P54C) (586-class), 100.23 MHz, id 0x52c cpu0: features 1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok Compaq Triflex Host-PCI Bridge (miscellaneous prehistoric, revision 0x01) at pci0 dev 0 function 0 not configured siop0 at pci0 dev 10 function 0: Symbios Logic 53c825 (fast wide scsi) siop0: interrupting at irq 10 scsibus0 at siop0: 16 targets, 8 luns per target rtk0 at pci0 dev 12 function 0: Realtek 8139 10/100BaseTX rtk0: interrupting at irq 9 rtk0: Ethernet address [_MAC_XXXXXXXXXX] ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface ukphy0: OUI 0x000000, model 0x0000, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto esiop0 at pci0 dev 14 function 0: Symbios Logic 53c875 (ultra-wide scsi) esiop0: using on-board RAM esiop0: interrupting at irq 5 scsibus1 at esiop0: 16 targets, 8 luns per target pceb0 at pci0 dev 15 function 0 pceb0: Intel 82375EB/SB PCI-EISA Bridge (PCEB) (rev. 0x04) eisa0 at pceb0 eisa0: can`t map I/O space for slot 7 isa0 at pceb0 lpt2 at isa0 port 0x3bc-0x3bf irq : polled com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard vga0 at isa0 port 0x3b0-0x3df iomem 0xa0000-0xbffff wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug `n Play device support npx0 at isa0 port 0xf0-0xff: using exception 16 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 isapnp0: no ISA Plug `n Play devices found fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec Kernelized RAIDframe activated scsibus0: waiting 2 seconds for devices to settle... scsibus1: waiting 2 seconds for devices to settle... sd0 at scsibus0 target 0 lun 0: <IBM-PSG, DNES-309170W !#, SAHR> disk fixed sd0: 8678 MB, 11474 cyl, 5 head, 309 sec, 512 bytes/sect x 17774160 sectors sd0: sync (100.00ns offset 8), 16-bit (20.000MB/s) transfers, tagged queueing sd1 at scsibus0 target 1 lun 0: <IBM-PSG, DNES-309170W !#, SAHR> disk fixed sd1: 8678 MB, 11474 cyl, 5 head, 309 sec, 512 bytes/sect x 17774160 sectors sd1: sync (100.00ns offset 8), 16-bit (20.000MB/s) transfers, tagged queueing sd2 at scsibus0 target 2 lun 0: <IBM-PSG, DNES-309170W !#, SAHR> disk fixed sd2: 8678 MB, 11474 cyl, 5 head, 309 sec, 512 bytes/sect x 17774160 sectors sd2: sync (100.00ns offset 8), 16-bit (20.000MB/s) transfers, tagged queueing cd0 at scsibus1 target 5 lun 0: <COMPAQ, CD-ROM CR-503BCQ, 1.1i> cdrom removable cd0: async, 8-bit transfers boot device: sd0 root on sd0a dumps on sd0b root file system type: ffs wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)