Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2004-12-01 18:13:18
From: obirt
Description: i815 GX115 NetBSD 2.0
NetBSD 2.0 (GENERIC) #0: Wed Dec 1 17:45:15 EST 2004 root@xxx:/usr/obj/sys/arch/i386/compile/GENERIC total memory = 381 MB avail memory = 365 MB BIOS32 rev. 0 found at 0xffe90 mainbus0 (root) cpu0 at mainbus0: (uniprocessor) cpu0: Intel Pentium III (686-class), 797.45 MHz, id 0x686 cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR> cpu0: features 383f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX> cpu0: features 383f9ff<FXSR,SSE> cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way cpu0: L2 cache 256 KB 32B/line 8-way cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way cpu0: 8 page colors pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: Intel 82815 Hub (rev. 0x02) pchb0: random number generator enabled agp0 at pchb0: aperture at 0xf4000000, size 0x4000000 vga1 at pci0 dev 2 function 0: Intel 82815 Graphics (rev. 0x02) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 ppb0 at pci0 dev 30 function 0: Intel 82801BA Hub-to-PCI Bridge (rev. 0x02) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled ex0 at pci1 dev 12 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 0x78) ex0: interrupting at irq 11 ex0: MAC address [_MAC_XXXXXXXXXX] bmtphy0 at ex0 phy 24: Broadcom 3c905C internal PHY, rev. 7 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcib0 at pci0 dev 31 function 0 pcib0: Intel 82801BA LPC Interface Bridge (rev. 0x02) piixide0 at pci0 dev 31 function 1 piixide0: Intel 82801BA IDE Controller (ICH2) (rev. 0x02) piixide0: bus-master DMA support present piixide0: primary channel wired to compatibility mode piixide0: primary channel interrupting at irq 14 atabus0 at piixide0 channel 0 piixide0: secondary channel wired to compatibility mode piixide0: secondary channel interrupting at irq 15 atabus1 at piixide0 channel 1 uhci0 at pci0 dev 31 function 2: Intel 82801BA USB Controller (rev. 0x02) uhci0: interrupting at irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered Intel 82801BA SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured auich0 at pci0 dev 31 function 5: i82801BA (ICH2) AC-97 Audio auich0: interrupting at irq 10 auich0: ac97: Analog Devices AD1885 codec; headphone, Analog Devices Phat Stereo auich0: ac97: ext id 1<VRA> isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug `n Play device support npx0 at isa0 port 0xf0-0xff: using exception 16 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 isapnp0: no ISA Plug `n Play devices found auich0: measured ac97 link rate at 55090 Hz, will use 55000 Hz audio0 at auich0: full duplex, mmap, independent fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec Kernelized RAIDframe activated umct0 at uhub0 port 1 umct0: Belkin USB PDA Adapter Belkin Components, rev 1.10/1.02, addr 2 ucom0 at umct0 wd0 at atabus0 drive 0: <Maxtor 51536H2> wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 14594 MB, 29651 cyl, 16 head, 63 sec, 512 bytes/sect x 29888820 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers) atapibus0 at atabus1: 2 targets cd0 at atapibus0 drive 0: <LG CD-RW CED-8080B, 2000/03/05, 1.04> cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2 cd0(piixide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers) boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs lfs_mountfs: please consider increasing BUFPAGES to at least 0 wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)