Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-12-10 23:13:41
From: Richard Bejtlich
Description: Mighty morphin` Dell Dimenson XPS P200S 200 MHz Pentium with 32 MB RAM running NetBSD 2.0 RELEASE.
NetBSD 2.0 (GENERIC) #0: Wed Dec  1 10:58:25 UTC 2004
        builds@build:/big/builds/ab/netbsd-2-0-RELEASE/i386/200411300000Z-obj/bi
g/builds/ab/netbsd-2-0-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 32380 KB
avail memory = 23968 KB
BIOS32 rev. 0 found at 0xfd850
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium (P54C) (586-class), 199.44 MHz, id 0x52c
cpu0: features 1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82437VX System Controller (TVX) (rev. 0x01)
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371SB PCI-to-ISA Bridge (PIIX3) (rev. 0x00)
piixide0 at pci0 dev 7 function 1
piixide0: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel ignored (disabled)
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus0 at piixide0 channel 1
vga1 at pci0 dev 13 function 0: S3 ViRGE (rev. 0x06)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
tlp0 at pci0 dev 15 function 0: ADMtek AN985 Ethernet, pass 1.1
tlp0: interrupting at irq 10
tlp0: Ethernet address xx:xx:xx:xx:xx:xx
ukphy0 at tlp0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x00e092, model 0x0001, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Stallion Technologies EasyIO (miscellaneous communications, revision 0x01) at pc
i0 dev 16 function 0 not configured
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug `n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: read port 0x203
sb1 at isapnp0 port 0x220/16,0x330/2,0x388/4 irq 5 drq 1,5
sb1: Creative ViBRA16C PnP Audio: dsp v4.13
audio0 at sb1: full duplex, mmap, independent
mpu0 at sb1
midi1 at mpu0: SB MPU-401 MIDI UART
opl0 at sb1: model OPL3
midi2 at opl0: SB Yamaha OPL3
joy0 at isapnp0 port 0x200/8
joy0: Creative ViBRA16C PnP Game
joy0: joystick not connected
com3 at isapnp0 port 0x2f8/8 irq 3: ns16550a, working fifo
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <CD-ROM CDU311, , 3.0h> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 3, DMA mode 1
wd0 at atabus0 drive 1: <Maxtor 91024U3>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 9765 MB, 19841 cyl, 16 head, 63 sec, 512 bytes/sect x 19999728 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(piixide0:1:0): using PIO mode 0, DMA mode 1 (using DMA data transfers)
wd0(piixide0:1:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)