Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2004-12-14 23:07:45
From: obirt
Description: i915 PCI Express, 3 GHz. I`ll try out the MP and ACPI kernels later.
NetBSD 2.99.11 (GENERIC) #0: Mon Dec 13 23:41:16 EST 2004
	xxx@xxx.xxx:/usr/current/src/sys/arch/i386/compile/obj/GENERIC
total memory = 1014 MB
avail memory = 984 MB
BIOS32 rev. 0 found at 0xffe90
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel (686-class), 2992.60 MHz, id 0xf34
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 441d<SSE3,MONITOR,DS-CPL,CID>
cpu0: "Intel(R) Pentium(R) 4 CPU 3.00GHz"
cpu0: I-cache 12K uOp cache 8-way
cpu0: L2 cache 1 MB 64B/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: running without thermal monitor!
cpu0: 32 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82915P/G/GL Host (rev. 0x04)
ppb0 at pci0 dev 1 function 0: Intel 82915P/G/GL PCI Express Bridge (rev. 0x04)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga1 at pci0 dev 2 function 0: Intel 82915G/GL Integrated Graphics Device (rev. 0x04)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
Intel 82915G/GL IGD Companion (miscellaneous display, revision 0x04) at pci0 dev 2 function 1 not configured
ppb1 at pci0 dev 28 function 0: Intel 82801FB/FR PCI Express Port #0 (rev. 0x03)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci2 dev 0 function 0: Broadcom BCM5751 Gigabit Ethernet
bge0: interrupting at irq 11
bge0: ASIC BCM5750 A1 (0x4001), Ethernet address xx:xx:xx:xx:xx:xx
brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb2 at pci0 dev 28 function 1: Intel 82801FB/FR PCI Express Port #1 (rev. 0x03)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
uhci0 at pci0 dev 29 function 0: Intel 82801FB/FR USB UHCI Controller (rev. 0x03)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801FB/FR USB UHCI Controller (rev. 0x03)
uhci1: interrupting at irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801FB/FR USB UHCI Controller (rev. 0x03)
uhci2: interrupting at irq 3
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: Intel 82801FB/FR USB UHCI Controller (rev. 0x03)
uhci3: interrupting at irq 10
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801FB/FR USB EHCI Controller (rev. 0x03)
ehci0: interrupting at irq 9
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: single transaction translator
uhub4: 8 ports with 8 removable, self powered
ppb3 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xd3)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
auich0 at pci0 dev 30 function 2: i82801FB (ICH6) AC-97 Audio
auich0: interrupting at irq 10
auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo
auich0: ac97: ext id 601<AC97_22,AMAP,VRA>
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801FB LPC Interface Bridge (rev. 0x03)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801FB IDE Controller (ICH6) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel ignored (disabled)
piixide1 at pci0 dev 31 function 2
piixide1: Intel 82801FB Serial ATA/Raid Controller (rev. 0x03)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
piixide1: using irq 5 for native-PCI interrupt
atabus1 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus2 at piixide1 channel 1
Intel 82801FB/FR SMBus Controller (SMBus serial bus, revision 0x03) at pci0 dev 31 function 3 not configured
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug `n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug `n Play devices found
auich0: measured ac97 link rate at 48002 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-ST RW/DVD GCC-4481B, , E106> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
wd0 at atabus1 drive 0: <ST340014AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 38146 MB, 77504 cyl, 16 head, 63 sec, 512 bytes/sect x 78125000 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
boot device: bge0
root on bge0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server: xxx.xxx.xxx.xxx
nfs_boot: my_domain=dtcc.edu
nfs_boot: my_addr=xxx.xxx.xxx.xxx
nfs_boot: my_mask=xxx.xxx.xxx.xxx
root on xxx.xxx.xxx.xxx:/home
root file system type: nfs
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Composite USB PS2 Converter USB to PS2 Adaptor  v1.12, rev 1.10/0.01, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1
uhidev1: Composite USB PS2 Converter USB to PS2 Adaptor  v1.12, rev 1.10/0.01, addr 2, iclass 3/1
uhidev1: 3 report ids
ums0 at uhidev1 reportid 1: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0