Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2004-12-28 11:48:48
From: neuropunks
Description: Sun Netra T1 - FreeBSD/sparc64
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #6: Fri May 28 08:54:03 EST 2004
Preloaded elf kernel "/boot/kernel/kernel" at 0xc039e000.
Timecounter "tick" frequency 440066656 Hz quality 0
real memory  = 536870912 (512 MB)
avail memory = 509804544 (486 MB)
cpu0: Sun Microsystems UltraSparc-IIi Processor (440.07 MHz CPU)
nexus0: <OpenFirmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Sabre, impl 0, version 0, ign 0x7c0, bus A
pcib0: [FAST]
pcib0: [FAST]
DVMA map: 0xc0000000 to 0xc3ffffff
pci0: <OFW PCI bus> on pcib0
pcib1: <APB PCI-PCI bridge> at device 1.1 on pci0
pci1: <OFW PCI bus> on pcib1
ebus0: revision 0x01
ebus0: <PCI-EBus2 bridge> mem 0xf1000000-0xf17fffff,0xf0000000-0xf0ffffff at device 1.0 on pci1
ebus0: <auxio> addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 (no driver attached)
ebus0: <power> addr 0x1400724000-0x1400724003 irq 37 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
ebus0: <su> addr 0x14003803f8-0x14003803ff irq 28 (no driver attached)
ebus0: <su> addr 0x14003602f8-0x14003602ff irq 20 (no driver attached)
ebus0: <ecpp> addr 0x1400700000-0x140070000f,0x140030015c-0x140030015d,0x1400340278-0x1400340287 irq 34 (no driver attached)
ebus0: <fdthree> addr 0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003203f0-0x14003203f7 irq 39 (no driver attached)
eeprom0: <EBus EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: hostid xxxxxxxx
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
ebus0: <watchdog> addr 0x1400200000-0x140020003f irq 4 (no driver attached)
ebus0: <display7seg> addr 0x1400200040 (no driver attached)
ebus0: <beeper> addr 0x1400722000-0x1400722003 (no driver attached)
ebus0: <flashprom> addr 0x1000400000-0x10005fffff (no driver attached)
ebus0: <flashprom> addr 0x1000800000-0x10009fffff (no driver attached)
ebus0: <i2c> addr 0x1400600000-0x1400600003 irq 40 (no driver attached)
ebus0: <i2c> addr 0x1400100000-0x1400100003 irq 27 (no driver attached)
ebus0: <SUNW,lom> addr 0x1400400000-0x1400400063 (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0xe0000000-0xe0007fff at device 1.1 on pci1
hme0: Ethernet address: xx:xx:xx:xx:xx:xx
miibus0: <MII bus> on hme0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ukphy1: <Generic IEEE 802.3u media interface> on miibus0
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sym0: <875> port 0xc00000-0xc000ff mem 0xe000a000-0xe000afff,0xe0008000-0xe00080ff at device 2.0 on pci1
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
hme1: <Sun HME 10/100 Ethernet> mem 0xe0010000-0xe0017fff at device 3.1 on pci1
hme1: Ethernet address: xx:xx:xx:xx:xx:xx
miibus1: <MII bus> on hme1
ukphy2: <Generic IEEE 802.3u media interface> on miibus1
ukphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib2: <APB PCI-PCI bridge> at device 1.0 on pci0
pci2: <OFW PCI bus> on pcib2
pcib3: <OFW PCI-PCI bridge> at device 1.0 on pci2
pci3: <OFW PCI bus> on pcib3
atapci0: <CMD 646 WDMA2 controller> port 0x1020-0x102f,0x1018-0x101b,0x1010-0x1017,0x1008-0x100b,0x1000-0x1007 at device 14.0 on pci3
pcib3: slot 14 INTA is routed to irq 2
atapci0: [MPSAFE]
ata2: at 0x1000 on atapci0
ata2: [MPSAFE]
ata3: at 0x1010 on atapci0
ata3: [MPSAFE]
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
acd0: CDRW <TOSHIBA CD-ROM XM-7002Bc> at ata3-master PIO4
Waiting 15 seconds for SCSI devices to settle
GEOM: create disk da0 dp=0xfffff8000088cc68
GEOM: create disk da1 dp=0xfffff8000088c868
da0 at sym0 bus 0 target 0 lun 0
da0: <SEAGATE ST318203LSUN18G 034A> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 17274MB (35378533 512 byte sectors: 255H 63S/T 2202C)
da1 at sym0 bus 0 target 1 lun 0
da1: <SEAGATE ST318404LSUN18G 4207> Fixed Direct Access SCSI-3 device
da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled
da1: 17274MB (35378533 512 byte sectors: 255H 63S/T 2202C)
Mounting root from ufs:/dev/da0a