Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2005-01-03 18:40:19
From: bsdguy
Description: DELL Poweredge PII 333, Dual support, 128MB RAM ECC, 3x9.1GB SCSI disk, RAID, NEC 48X, SCSI CDROM, good cool !.
NetBSD 2.0_RC4 (GENERIC) #0: Sat Oct 9 14:39:49 CEST 2004 ficovh@localhost:/home/ficovh/builds/NetBSD-2.0_RC4-i386-obj/sys/arch/i386/compile/GENERIC total memory = 127 MB avail memory = 117 MB BIOS32 rev. 0 found at 0xffe90 mainbus0 (root) cpu0 at mainbus0: (uniprocessor) cpu0: Intel Pentium II (686-class), 331.73 MHz, id 0x651 cpu0: features 183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR> cpu0: features 183fbff<PGE,MCA,CMOV,PAT,PSE36,MMX> cpu0: features 183fbff<FXSR> cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way cpu0: L2 cache 512 KB 32B/line 4-way cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way cpu0: 32 page colors pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x02) agp0 at pchb0: aperture at 0xf0000000, size 0x4000000 ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x02) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled vga1 at pci1 dev 0 function 0: ATI Technologies 3D Rage Pro (AGP 1x) (rev. 0x5c) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 ppb1 at pci0 dev 2 function 0: Digital Equipment DECchip 21152 PCI-PCI Bridge (rev. 0x03) pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled, rd/line, wr/inv ok ahc1 at pci2 dev 4 function 0: Adaptec aic7890/91 Ultra2 SCSI adapter ahc1: interrupting at irq 10 ahc1: aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs scsibus0 at ahc1: 16 targets, 8 luns per target ahc2 at pci2 dev 6 function 0: Adaptec aic7860 Ultra SCSI adapter ahc2: interrupting at irq 10 ahc2: aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs scsibus1 at ahc2: 8 targets, 8 luns per target amr0 at pci2 dev 10 function 0: AMI RAID <Series 428> amr0: interrupting at irq 5 amr0: firmware <U.84>, BIOS <1.63>, 32MB RAM ld0 at amr0 unit 0: RAID 0, optimal ld0: 8568 MB, 4352 cyl, 64 head, 63 sec, 512 bytes/sect x 17547264 sectors pcib0 at pci0 dev 7 function 0 pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02) piixide0 at pci0 dev 7 function 1 piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01) piixide0: device disabled (at device) uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01) uhci0: can`t map i/o space Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x02) at pci0 dev 7 function 3 not configured fxp0 at pci0 dev 8 function 0: Intel i82557 Ethernet, rev 2 fxp0: interrupting at irq 14 fxp0: Ethernet address [_MAC_XXXXXXXXXX] inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ex0 at pci0 dev 10 function 0: 3Com 3c905B-TX 10/100 Ethernet (rev. 0x30) ex0: interrupting at irq 11 ex0: MAC address [_MAC_XXXXXXXXXX] exphy0 at ex0 phy 24: 3Com internal media interface exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug `n Play device support npx0 at isa0 port 0xf0-0xff: using exception 16 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 isapnp0: no ISA Plug `n Play devices found fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec Kernelized RAIDframe activated scsibus0: waiting 2 seconds for devices to settle... scsibus1: waiting 2 seconds for devices to settle... cd0 at scsibus1 target 5 lun 0: <NEC, CD-ROM DRIVE:465, 1.03> cdrom removable cd0: sync (50.00ns offset 15), 8-bit (20.000MB/s) transfers boot device: ld0 root on ld0a dumps on ld0b root file system type: ffs wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)