Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2005-02-03 02:34:04
From: dna
Description: freeBSD 6.0-current MSI K8T Master2-FAR
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #0: Wed Feb  2 20:28:24 MST 2005
    root@***.net:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 242 (1603.65-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0xf5a  Stepping = 10
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory  = 1072562176 (1022 MB)
avail memory = 1024495616 (977 MB)
ACPI APIC Table: <VIAK8  AWRDACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 0.3> irqs 0-23 on motherboard
acpi0: <VIAK8 AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci_link0: <ACPI PCI Link ALKB> irq 0 on acpi0
pci_link1: <ACPI PCI Link ALKA> irq 0 on acpi0
pci_link2: <ACPI PCI Link ALKC> irq 0 on acpi0
pci_link3: <ACPI PCI Link ALKD> irq 0 on acpi0
pci0: <ACPI PCI bus> on pcib0
pci_link1: Unable to choose an IRQ
pci_link0: Unable to choose an IRQ
pci_link2: Unable to choose an IRQ
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <multimedia, video> at device 5.0 (no driver attached)
cbb0: <RF5C475 PCI-CardBus Bridge> mem 0xf6014000-0xf6014fff irq 18 at device 7.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
bge0: <Broadcom BCM5705 Gigabit Ethernet, ASIC rev. 0x3003> mem 0xf6000000-0xf600ffff irq 16 at device 11.0 on pci0
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
atapci0: <VIA 6420 SATA150 controller> port 0xb400-0xb4ff,0xb000-0xb00f,0xac00-0xac03,0xa800-0xa807,0xa400-0xa403,0xa000-0xa007 irq 20 at device 15.0 on pci0
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
atapci1: <VIA 8237 UDMA133 controller> port 0xb800-0xb80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
uhci0: <VIA 83C572 USB controller> port 0xbc00-0xbc1f irq 21 at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 21 at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 21 at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 16.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pci0: <multimedia, audio> at device 17.5 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
pci_link4: <ACPI PCI Link LNKA> irq 10 on acpi0
pci_link5: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link6: <ACPI PCI Link LNKC> irq 5 on acpi0
pci_link7: <ACPI PCI Link LNKD> on acpi0
pci_link8: <ACPI PCI Link LNKE> on acpi0
pci_link9: <ACPI PCI Link LNKF> on acpi0
pci_link10: <ACPI PCI Link LNK0> on acpi0
pci_link11: <ACPI PCI Link LNK1> on acpi0
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd3fff,0xc0000-0xcc7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ata0-master: DMA limited to UDMA33, non-ATA66 cable or device
ad0: 38172MB <MAXTOR 6L040J2/A93.0300> [77557/16/63] at ata0-master UDMA33
acd0: CDRW <SAMSUNG CD-R/RW SW-408B/BS02> at ata1-master PIO4
ad4: 114473MB <ST3120026AS/3.05> [232581/16/63] at ata2-master SATA150
SMP: AP CPU #1 Launched!
wi0: <The Linksys Group, Inc. Instant Wireless Network PC Card> at port 0x100-0x13f irq 18 function 0 config 1 on pccard0
wi0: using RF:PRISM3(PCMCIA)
wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.2)
wi0: Ethernet address: [_MAC_XXXXXXXXXX]
Trying to mount root from ufs:/dev/ad4s1a