Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2005-02-16 15:38:52
From: dsantos
Description: iBokk G3 500 running OpenBSD
[ using 373324 bytes of bsd ELF symbol table ]
console out [ATY,RageM3p29s]console in [keyboard] ADB found
: memaddr 94000000 size 4000000, : consaddr 96008000, : ioaddr 90020000, size 20000: memtag 8000, iotag 8000: width 1024 linebytes 1024 height 768 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2004 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 3.6 (GENERIC) #47: Fri Sep 17 14:55:19 MDT 2004
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 402653184 (393216K)
avail mem = 359202816 (350784K)
using 1254 buffers containing 20131840 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: 750 (Revision 3311): 499 MHz: 256KB backside cache
memc0 at mainbus0: uni-n
mpcpcibr0 at mainbus0: uni-north, Revision 0xff
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple Pangea AGP" rev 0x00
vgafb0 at pci0 dev 16 function 0 "ATI Mobility M3" rev 0x02, mmio
wsdisplay0 at vgafb0: console (std, vt100 emulation)
mpcpcibr1 at mainbus0: uni-north, Revision 0x0
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple Pangea PCI" rev 0x00
macobio0 at pci1 dev 23 function 0 "Apple Pangea" rev 0x00
openpic0 at macobio0: version 0x4614
gpio_obio0 at macobio0
gpio_obio1 at gpio_obio0 irq 47
programmer-switch at gpio_obio0 not configured
firewire-linkon at gpio_obio0 not configured
gpio1 at gpio_obio0 not configured
gpio9 at gpio_obio0 not configured
extint-gpio4 at gpio_obio0 not configured
extint-gpio12 at gpio_obio0 not configured
zsc0 at macobio0: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
adb0 at macobio0 irq 25: via-pmu 3 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: PowerBook G4 keyboard (Inverted T)
wskbd0 at akbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
ams0 at adb0 addr 3: EMP trackpad <tpad> 2-button, 400 dpi
wsmouse0 at ams0 mux 0
abtn0 at adb0 addr 7: brightness/volume/eject buttons
apm0 at adb0: battery flags 0x5, 100% charged
ki2c0 at macobio0
wdc0 at macobio0 irq 19: DMA
wd0 at wdc0 channel 0 drive 0: <TOSHIBA MK1017GAP>
wd0: 16-sector PIO, LBA, 9590MB, 19640880 sectors
atapiscsi0 at wdc0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-R2002, 1B27> SCSI0 5/cdrom removable
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2
cd0(wdc0:0:1): using PIO mode 4, DMA mode 2
ohci0 at pci1 dev 24 function 0 "Apple Pangea USB" rev 0x00: irq 27, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Apple OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci1 dev 25 function 0 "Apple Pangea USB" rev 0x00: irq 28, version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Apple OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: KYE Genius USB Wheel Mouse, rev 1.00/0.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
mpcpcibr2 at mainbus0: uni-north, Revision 0xff
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple Pangea PCI" rev 0x00
"Apple Pangea FireWire" rev 0x00 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple GMAC" rev 0x00: irq 41, address 00:03:93:54:XX:XX
bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 3
bootpath: `/pci@f2000000/mac-io@17/ata-4@1f000/disk@0/bsd`
boot device: wd0.
root on wd0a
rootdev=0x0 rrootdev=0xb00 rawdev=0xb02