Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2005-03-05 10:13:37
From: jfa
Description: SPARCengine Ultra AXe
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 2.0 (GENERIC) #0: Thu Dec 2 02:49:29 UTC 2004
builds@build:/big/builds/ab/netbsd-2-0-RELEASE/sparc64/200411300000Z-obj/big/builds/ab/netbsd-2-0-RELEASE/src/sys/arch/sparc64/compile/GENERIC
total memory = 256 MB
avail memory = 239 MB
bootpath: /pci@1f,0/pci@1,1/ide@3,0/disk@0,0
mainbus0 (root): SUNW,UltraAX-e: [_HOSTID_XXXXX]
cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 300.007 MHz, version 0 FPU
cpu0: 32K instruction (32 b/l), 16K data (32 b/l), 256K external (64 b/l)
psycho0 at mainbus0
SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0
psycho_alloc_extent: prom_getprop failed
psycho_alloc_extent: prom_getprop failed
DVMA map: c0000000 to e0000000
IOTSB: 1072c000 to 107ac000
pci0 at psycho0
pci0: i/o space, memory space enabled
ppb0 at pci0 dev 1 function 1: Sun Microsystems, Inc. Simba PCI bridge (rev. 0x13)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ebus0 at pci1 dev 1 function 0
ebus0: Sun Microsystems, Inc. PCIO Ebus2, revision 0x01
clock0 at ebus0 addr 0-1fff: mk48t59
flashprom at ebus0 addr 0-fffff not configured
com0 at ebus0 addr 3803f8-3803ff ipl 28: ns16550a, working fifo
com0: console
com1 at ebus0 addr 3602f8-3602ff ipl 29: ns16550a, working fifo
sab0 at ebus0 addr 400000-40007f ipl 43: rev 3.2
sabtty0 at sab0 port 0
sabtty1 at sab0 port 1
lpt0 at ebus0 addr 340278-340287, 30015c-30015d, 700000-70000f ipl 34
power at ebus0 addr 724000-724003 ipl 37 not configured
watchdog at ebus0 addr 30002e-300037 ipl 4 not configured
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 72c000-72c003, 72f000-72f003
SUNW,pll at ebus0 addr 504000-504002 not configured
audiocs0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, 722000-722003 ipl 35 ipl 36: CS4231A
audio0 at audiocs0: full duplex
i2c at ebus0 addr 600000-600001 ipl 40 not configured
fdthree at ebus0 addr 3203f0-3203f7, 706000-70600f, 720000-720003 ipl 39 not configured
beeper at ebus0 addr 300078-300079 not configured
ATI Technologies 3D Rage Pro (VGA display, revision 0x5c) at pci1 dev 2 function 0 not configured
cmdide0 at pci1 dev 3 function 0
cmdide0: CMD Technology PCI0646 (rev. 0x03)
cmdide0: bus-master DMA support present
cmdide0: primary channel configured to native-PCI mode
cmdide0: using ivec 1820 for native-PCI interrupt
atabus0 at cmdide0 channel 0
cmdide0: secondary channel configured to native-PCI mode
atabus1 at cmdide0 channel 1
hme0 at pci1 dev 1 function 1: Sun Happy Meal Ethernet, rev. 1
hme0: interrupting at ivec 3021
hme0: Ethernet address [_MAC_XXXXXXXXXX]
ukphy0 at hme0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0006b8, model 0x000c, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb1 at pci0 dev 1 function 0: Sun Microsystems, Inc. Simba PCI bridge (rev. 0x13)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
fxp0 at pci2 dev 2 function 0: Intel i82557 Ethernet, rev 2
fxp0: interrupting at ivec 14
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcons at mainbus0 not configured
No counter-timer -- using %tick at 300MHz as system clock.
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <Maxtor 6E040L0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 39205 MB, 79656 cyl, 16 head, 63 sec, 512 bytes/sect x 80293248 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(cmdide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
root on wd0a dumps on wd0b
root file system type: ffs