Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2005-03-05 12:01:11
From: mfl
Description: hp vectra D9820-60011 PIII 800
OpenBSD 3.6 (GENERIC) #0: Tue Mar  1 20:11:29 CET 2005
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 864 MHz
real mem  = 535339008 (522792K)
avail mem = 481525760 (470240K)
using 4278 buffers containing 26869760 bytes (26240K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(f2) BIOS, date 04/11/01, BIOS32 rev. 0 @ 0xfd87d
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xfd810/0x7f0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xa000 0xe0000/0x4000! 0xe4000/0xc000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82815 Graphics" rev 0x02: aperture at 0xf0000000, size 0x4000000
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02
pci1 at ppb0 bus 1
fwohci0 at pci1 dev 2 function 0 "AT&T/Lucent FW322 1394" rev 0x61: irq 9
fwohci0: OHCI 1.0, xx:xx:xx:xx:xx:xx:34:26, 400Mb/s, 2048 max_rec, 8 iso_ctx
xl0 at pci1 dev 4 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 7, address xx:xx:xx:xx:xx:xx
exphy0 at xl0 phy 24: 3Com internal media interface
ichpcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD200BB-60CJA0>
wd0: 16-sector PIO, LBA, 19092MB, 39102336 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 31 function 2 "Intel 82801AA USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82801AA SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5 "Intel 82801AA AC97" rev 0x02: irq 9, ICH AC97
ac97: codec id 0x43525934 (Cirrus Logic CS4299 rev 4)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt1 at isa0 port 0x278/4: polled
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff65 netmask ffe5 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
fw at fwohci0 not configured
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
agp_release_helper: mem 0 is bound
agp_release_helper: mem 1 is bound
agp_release_helper: mem 2 is bound
agp_release_helper: mem 3 is bound
agp_release_helper: mem 4 is bound
agp_release_helper: mem 5 is bound
auich0: measured ac97 link rate at 48006 Hz, will use 48000 Hz
uaudio0 at uhub0 port 1 configuration 1 interface 0: Plantronics Plantronics Headset, rev 1.10/0.04, addr 3
uaudio0: audio rev 1.00
uaudio0: 14 mixer controls
audio1 at uaudio0
uhidev1 at uhub0 port 1 configuration 1 interface 3
uhidev1: Plantronics Plantronics Headset, rev 1.10/0.04, addr 3, iclass 3/0
uhid0 at uhidev1: input=2, output=0, feature=0