Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2005-03-09 11:19:16
From: Loren Schooley
Description: Dell 2450
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.10-RELEASE #0: Tue Jun 8 08:33:37 GMT 2004
[_EMAIL_XXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/COBALT
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel Pentium III (860.88-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536862720 (524280K bytes) avail memory = 518635520 (506480K bytes) Changing APIC ID for IO APIC #0 from 0 to 2 on chip Changing APIC ID for IO APIC #1 from 0 to 3 on chip Programming 16 pins in IOAPIC #0 Programming 16 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 3, version: 0x000f0011, at 0xfec01000 Preloaded elf kernel "kernel" at 0xc03a8000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fc2c0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard IOAPIC #1 intpin 6 -> irq 2
pci0: <PCI bus> on pcib0
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xecc0-0xecff mem 0xfe000000-0xfe0fffff,0xfe102000-0xfe102fff irq 2 at device 8.0 on pci0
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <ATI model 4759 graphics accelerator> at 14.0
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x8b0-0x8bf at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfe100000-0xfe100fff irq 10 at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard IOAPIC #1 intpin 15 -> irq 5 IOAPIC #1 intpin 0 -> irq 11
pci1: <PCI bus> on pcib1
pcib2: <PCI to PCI bridge (vendor=8086 device=0962)> at device 2.0 on pci1 IOAPIC #1 intpin 14 -> irq 13
pci2: <PCI bus> on pcib2
pci2: <unknown card> (vendor=0x9005, dev=0x00c5) at 4.0 irq 5
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem 0xf7ffe000-0xf7ffefff irq 13 at device 4.1 on pci2
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
aac0: <Dell PERC 3/Si> mem 0xf0000000-0xf3ffffff irq 5 at device 2.1 on pci1
aac0: i960RX 100MHz, 54MB cache memory, no battery support
aac0: Kernel 2.5-0, Build 2991, S/N 3c01d0
aac0: Supported Options=0
fxp1: <Intel 82559 Pro/100 Ethernet> port 0xccc0-0xccff mem 0xf9000000-0xf90fffff,0xf9100000-0xf9100fff irq 11 at device 8.0 on pci1
fxp1: Ethernet address [_MAC_XXXXXXXXXX]
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xec000-0xeffff on isa0 pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
ata0-slave: ATAPI identify retries exceeded Waiting 15 seconds for SCSI devices to settle
aacd0: <Volume> on aac0
aacd0: 34709MB (71084544 sectors)
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/aacd0s1a