Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2005-03-22 08:46:51
From: Marcus
Description: Acer Power F1 desktop system, administrator workstation
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE-p5 #4: Thu Mar  3 18:07:11 CET 2005
    [_EMAIL_XXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/MARCUS
WARNING: debug.mpsafenet forced to 0 as i4b_isppp requires Giant
WARNING: MPSAFE network stack disabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 2.66GHz (2666.77-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf33  Stepping = 3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory  = 503250944 (479 MB)
avail memory = 482770944 (460 MB)
ACPI APIC Table: <AWARD  AWRDACPI>
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AWARD AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (3 Cx states)> port 0x530-0x537 on acpi0
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x10e0-0x10ff,0x1000-0x10df,0x480-0x48f,0xcf8
-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SiS 661 host to AGP bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pc
i0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 964 UDMA133 controller> port 0x4000-0x400f,0x376,0x170-0x177,0x3f6
,0x1f0-0x1f7 at device 2.5 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pcm0: <SiS 7012> port 0xd400-0xd47f,0xd000-0xd0ff irq 18 at device 2.7 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC655 AC97 Codec>
ohci0: <SiS 5571 USB controller> mem 0xe1123000-0xe1123fff irq 20 at device 3.0 
on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xe1124000-0xe1124fff irq 21 at device 3.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
umass0: Iomega USB RRD, rev 2.00/11.00, addr 2
ohci2: <SiS 5571 USB controller> mem 0xe1120000-0xe1120fff irq 22 at device 3.2 on pci0
ohci2: [GIANT-LOCKED]
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <SiS 5571 USB controller> on ohci2
usb2: USB revision 1.0
uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe1121000-0xe1121fff irq 23 at device 3.3 o
n pci0
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
usb3: EHCI version 1.0
usb3: companion controllers, 3 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: SiS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 8 ports with 8 removable, self powered
ehci_idone: need toggle update status=80028d40 nstatus=80008c80
umass1: Iomega USB RRD, rev 2.00/11.00, addr 2
ehci_idone: need toggle update status=80028d40 nstatus=80008c80
fxp0: <Intel 82551 Pro/100 Ethernet> port 0xd800-0xd83f mem 0xe1100000-0xe111ffff,0xe112200
0-0xe1122fff irq 17 at device 9.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: [_MAC_XXXXXXXXXX]
fxp0: [GIANT-LOCKED]
iavc0: <AVM B1 PCI> port 0xe000-0xe01f,0xdc00-0xdc3f mem 0xe1125000-0xe112503f irq 18 at de
vice 10.0 on pci0
capi0: card type 2 attached
iavc0: [GIANT-LOCKED]
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xe400-0xe4ff mem 0xe1126000-0xe1126fff irq 19
 at device 11.0 on pci0
ahc0: [GIANT-LOCKED]
aic7880: Single Channel A, SCSI Id=7, 16/253 SCBs
fwohci0: <VIA Fire II (VT6306)> port 0xe800-0xe87f mem 0xe1127000-0xe11277ff irq 17 at devi
ce 13.0 on pci0
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:b0:69
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: [_MAC_XXXXXXXXXX]
fwe0: Ethernet address: [_MAC_XXXXXXXXXX]
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
rl0: <RealTek 8139 10/100BaseTX> port 0xec00-0xecff mem 0xe1128000-0xe11280ff irq 18 at dev
ice 14.0 on pci0
miibus1: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus1
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: [_MAC_XXXXXXXXXX]
rl0: [GIANT-LOCKED]
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
orm0: <ISA Option ROMs> at iomem 0xd2000-0xd27ff,0xd0000-0xd17ff,0xc8000-0xcffff,0xc0000-0x
c7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2666774300 Hz quality 800
Timecounters tick every 10.000 msec
i4brbch: 4 raw B channel access device(s) attached
i4bisppp: 4 ISDN SyncPPP device(s) attached
i4btel: 4 ISDN telephony interface device(s) attached
i4btrc: 4 ISDN trace device(s) attached
i4b: ISDN call control device attached
i4bipr: 4 IP over raw HDLC ISDN device(s) attached
i4bctl: ISDN system control port attached
ad0: 38166MB <ST340014A/8.01> [77545/16/63] at ata0-master UDMA100
ad1: 39266MB <IC35L040AVER07-0/ER4OA45A> [79780/16/63] at ata0-slave UDMA100
acd0: DVDR <ATAPI DVD DD 2X16X4X16/G7M9> at ata1-master UDMA33
acd1: DVDROM <DVD-ROM DVD-16X6S/DSR2> at ata1-slave UDMA33
Waiting 15 seconds for SCSI devices to settle
umass0: at uhub1 port 2 (addr 2) disconnected
umass0: detached
sa0 at ahc0 bus 0 target 4 lun 0
sa0: <HP C1537A L111> Removable Sequential Access SCSI-2 device 
sa0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0 at umass-sim1 bus 1 target 0 lun 0
cd0: <Iomega RRD 74.B> Removable CD-ROM SCSI-0 device 
cd0: 1.000MB/s transfers
cd0: cd present [17090880 x 2048 byte records]
cd1 at ata1 bus 0 target 0 lun 0
cd1: <ATAPI DVD DD 2X16X4X16 G7M9> Removable CD-ROM SCSI-0 device 
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
cd2 at ata1 bus 0 target 1 lun 0
cd2: <DVD-ROM DVD-16X6S DSR2> Removable CD-ROM SCSI-0 device 
cd2: 33.000MB/s transfers
cd2: cd present [351066 x 2048 byte records]
Mounting root from ufs:/dev/ad0s2a
ehci_idone: need toggle update status=80028d40 nstatus=80008c80
ehci_idone: need toggle update status=80028d40 nstatus=80008c80
ehci_idone: need toggle update status=80028d40 nstatus=80008c80
ehci_idone: need toggle update status=80028d40 nstatus=80008c80
pflog0: promiscuous mode enabled