Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2005-03-28 14:35:29
From: herauthon
Description: NetBSD 2.0/i386 P2-Deschuttes/337Mhz - Asus P297-S AGP apache 2.0.53 / Pure-FTPd -
NetBSD 2.0 (GENERIC) #0: Wed Dec 1 10:58:25 UTC 2004 builds@build:/big/builds/ab/netbsd-2-0-RELEASE/i386/200411300000Z-obj/big/builds/ab/netbsd-2-0-RELEASE/src/sys/arch/i386/compile/GENERIC total memory = 159 MB avail memory = 148 MB BIOS32 rev. 0 found at 0xf04e0 mainbus0 (root) cpu0 at mainbus0: (uniprocessor) cpu0: Intel Pentium II (686-class), 337.51 MHz, id 0x652 cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR> cpu0: features 183f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX> cpu0: features 183f9ff<FXSR> cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way cpu0: L2 cache 512 KB 32B/line 4-way cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way cpu0: 32 page colors pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: Intel 82443LX PCI AGP Controller (PAC) (rev. 0x03) agp0 at pchb0: aperture at 0xe7800000, size 0x400000 ppb0 at pci0 dev 1 function 0: Intel 82443LX AGP Interface (PAC) (rev. 0x03) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled pcib0 at pci0 dev 4 function 0 pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x01) piixide0 at pci0 dev 4 function 1 piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01) piixide0: bus-master DMA support present piixide0: primary channel wired to compatibility mode piixide0: primary channel interrupting at irq 14 atabus0 at piixide0 channel 0 piixide0: secondary channel wired to compatibility mode piixide0: secondary channel interrupting at irq 15 atabus1 at piixide0 channel 1 uhci0 at pci0 dev 4 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01) pci_intr_map: no mapping for pin D (line=ff) uhci0: couldn`t map interrupt Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x01) at pci0 dev 4 function 3 not configured ahc1 at pci0 dev 6 function 0: Adaptec aic7880 Ultra SCSI adapter ahc1: interrupting at irq 10 ahc1: aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs scsibus0 at ahc1: 16 targets, 8 luns per target rtk0 at pci0 dev 9 function 0: Realtek 8139 10/100BaseTX rtk0: interrupting at irq 10 rtk0: Ethernet address [_MAC_XXXXXXXXXX] ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface ukphy0: OUI 0x000000, model 0x0000, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vga1 at pci0 dev 10 function 0: S3 ViRGE (rev. 0x06) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 isa0 at pcib0 com2 at isa0 port 0x3e8-0x3ef irq 5: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug `n Play device support npx0 at isa0 port 0xf0-0xff: using exception 16 isapnp0: no ISA Plug `n Play devices found Kernelized RAIDframe activated scsibus0: waiting 2 seconds for devices to settle... atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 0: <Memorex DVD-MAXX1240, MT1318 Firmware, VER 0.3> cdrom removable sd0 at scsibus0 target 0 lun 0: <IBM, DNES-309170W, SAH0> disk fixed cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers) sd0: 8748 MB, 11474 cyl, 5 head, 312 sec, 512 bytes/sect x 17916240 sectors sd0: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing sd1 at scsibus0 target 1 lun 0: <IBM-PSG, DNES-309170W !#, SAHR> disk fixed sd1: 8678 MB, 11474 cyl, 5 head, 309 sec, 512 bytes/sect x 17774160 sectors sd1: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing sd2 at scsibus0 target 2 lun 0: <IBM-PSG, DNES-309170W !#, SAHR> disk fixed sd2: 8678 MB, 11474 cyl, 5 head, 309 sec, 512 bytes/sect x 17774160 sectors sd2: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing cd1 at scsibus0 target 5 lun 0: <COMPAQ, CD-ROM CR-503BCQ, 1.1i> cdrom removable cd1: async, 8-bit transfers boot device: sd0 root on sd0a dumps on sd0b root file system type: ffs wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)