Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

Date: 2005-04-05 21:33:20
From: Tom D
Description: OpenBSD 3.5 GENERIC / K6-2 500 AMD-BUG / World Wont Compile / Test System.
OpenBSD 3.5 (GENERIC) #0: Sun Apr 13 21:43:50 EDT 2003
    [_EMAIL_XXXXXXXXXXX]:/sys/arch/i386/compile/GENERIC
cpu0: AMD-K6(tm) 3D processor ("AuthenticAMD" 586-class) 501 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX
real mem  = 267956224 (261676K)
avail mem = 242126848 (236452K)
using 3296 buffers containing 13500416 bytes (13184K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(b9) BIOS, date 05/11/00, BIOS32 rev. 0 @ 0xfb210
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xb698
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdce0/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 5 9 10 11
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C586 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xb000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT82C597 PCI" rev 0x04
ppb0 at pci0 dev 1 function 0 "VIA VT82C598 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "S3 Savage 4" rev 0x03
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "VIA VT82C586 ISA" rev 0x47
pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x06: ATA33, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 53073U6>
wd0: 16-sector PIO, LBA, 29311MB, 60030432 sectors
wd1 at pciide0 channel 0 drive 1: <ST320011A>
wd1: 16-sector PIO, LBA, 19458MB, 39851760 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
wd2 at pciide0 channel 1 drive 0: <ST320414A>
wd2: 16-sector PIO, LBA, 19458MB, 39851760 sectors
wd2(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x02: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pchb1 at pci0 dev 7 function 3 "VIA VT82C586 Power Mgmt" rev 0x10
dc0 at pci0 dev 9 function 0 "Lite-On PNIC" rev 0x20: irq 5, address [_MAC_XXXXXXXXXX]
bmtphy0 at dc0 phy 1: BCM5201 10/100 media interface, rev. 2
fxp0 at pci0 dev 11 function 0 "Intel 82557" rev 0x05: irq 9, address [_MAC_XXXXXXXXXX]
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c440 netmask c660 ttymask d6e2
pctr: user-level cycle counter enabled
mtrr: K6-family MTRR support (2 registers)
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
dkcsum: wd2 matched BIOS disk 82
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
ulpt0 at uhub0 port 1 configuration 1 interface 0
ulpt0: Hewlett-Packard PSC 750, rev 1.10/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode