Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2005-04-06 23:01:14
From: Jon Door
Description: Sony Vaio PCG-SRX87 (FreeBSD 6.0-CURRENT)
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #1: Fri Apr  1 14:27:24 EST 2005
    root@vaio-PCG-SRX87:/usr/obj/usr/src/sys/KERNELCONF
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) III Mobile CPU       850MHz (497.82-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 266862592 (254 MB)
avail memory = 251666432 (240 MB)
netsmb_dev: loaded
ath_hal:[_IP_XXX] (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <SONY U2> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci_link0: <ACPI PCI Link LNKA> irq 9 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 9 on acpi0
pci_link2: <ACPI PCI Link LNKC> on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 9 on acpi0
pci_link4: <ACPI PCI Link LNKH> irq 9 on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 0xf8000000-0xfbffffff,0xf4000000-0xf407ffff irq 9 at device 2.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci_link5: <ACPI PCI Link LNKE> irq 9 on acpi0
pci_link6: <ACPI PCI Link LNKF> on acpi0
pci_link7: <ACPI PCI Link LNKG> on acpi0
pci1: <ACPI PCI bus> on pcib1
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xf4101000-0xf41017ff,0xf4104000-0xf4107fff irq 9 at device 0.0 on pci1
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:39:e4
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
cbb0: <RF5C475 PCI-CardBus Bridge> at device 2.0 on pci1
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1410 PCI-CardBus Bridge> at device 5.0 on pci1
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci_link6: Unable to choose an IRQ
fxp0: <Intel 82801BA/CAM (ICH2/3) Pro/100 Ethernet> port 0x3000-0x303f mem 0xf4100000-0xf4100fff irq 9 at device 8.0 on pci1
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: [_MAC_XXXXXXXXXX]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1800-0x180f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0x1820-0x183f irq 9 at device 31.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0x2400-0x241f irq 9 at device 31.4 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcm0: <Intel ICH2 (82801BA)> port 0x1c00-0x1cff,0x1840-0x187f irq 9 at device 31.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Yamaha YMF753 AC97 Codec>
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
speaker0: <PC speaker> port 0x61 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xd8000-0xdbfff,0xdc000-0xdffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
umass0: Sony USB Memory Stick Slot, rev 1.10/1.09, addr 2
Timecounter "TSC" frequency 497823396 Hz quality 800
Timecounters tick every 1.000 msec
pid 34: corrected slot count (0->1)
ad0: 19077MB <TOSHIBA MK2018GAS Q2.02 C> at ata0-master UDMA100
(probe7:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0 
(probe7:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe7:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe7:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0
(probe7:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred
(probe7:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(probe7:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0 
(probe7:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe7:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe7:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe7:umass-sim0:0:0:0): Medium not present
(probe7:umass-sim0:0:0:0): Unretryable error
wi0: <Lucent Technologies WaveLAN/IEEE> at port 0x3040-0x307f irq 9 function 0 config 1 on pccard1
wi0: using Lucent Embedded WaveLAN/IEEE
wi0: Lucent Firmware: Station (6.16.1)
wi0: Ethernet address: [_MAC_XXXXXXXXXX]
Trying to mount root from ufs:/dev/ad0s1a