Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2005-04-10 06:54:45
From: tonyo
Description: Macintosh PowerPC G4 blue&white with openbsd 3.7
[ using 268288 bytes of bsd ELF symbol table ]
console out [ATY,Rage128y]console in [keyboard] USB and ADB found, using USB
: memaddr 84000000 size 4000000, : consaddr 84000000, : ioaddr 80920000, size 20000: memtag 8000, iotag 8000: width 640 linebytes 640 height 480 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2005 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 3.7 (wintermute) #0: Wed Apr 6 16:57:53 CEST 2005
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/macppc/compile/wintermute
real mem = 469762048 (458752K)
avail mem = 424493056 (414544K)
using 1254 buffers containing 23486464 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: 750 (Revision 0x202): 400 MHz: 1MB backside cache
mpcpcibr0 at mainbus0: grackle, Revision 0x40
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 0 function 0 vendor 0x1057 product 0x0002 rev 0x40
ppb0 at pci0 dev 13 function 0 vendor 0x1011 product 0x0026 rev 0x02
pci1 at ppb0 bus 1
vendor 0x104c product 0x8000 (class serial bus subclass Firewire, rev 0x02) at pci1 dev 0 function 0 not configured
pciide0 at pci1 dev 1 function 0 vendor 0x1095 product 0x0646 rev 0x07: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using irq 26 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080P0>
wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors
wd1 at pciide0 channel 0 drive 1: <SAMSUNG SP0812N>
wd1: 16-sector PIO, LBA48, 76351MB, 156368016 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
rl0 at pci1 dev 4 function 0 vendor 0x10ec product 0x8139 rev 0x10: irq 25 address [_MAC_XXXXXXXXXX]
rlphy0 at rl0 phy 0: RTL internal phy
macobio0 at pci1 dev 5 function 0 vendor 0x106b product 0x0017 rev 0x00
macintr0 at macobio0
zsc0 at macobio0: irq 15,16
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
awacs0 at macobio0: irq 17,8,9 headphones
audio at awacs0 not configured
adb0 at macobio0 irq 18: via-cuda 0 targets
aed0 at adb0 addr 0: ADB Event device
wdc0 at macobio0 irq 13: DMA
atapiscsi0 at wdc0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
scsibus0 targ 0 lun 0: <MATSHITA, CD-ROM CR-589, GA0W> SCSI0 5/cdrom removable not configured
atapiscsi0(wdc0:0:0): using BIOS timings, DMA mode 2
bm0 at macobio0 irq 42,33: address [_MAC_XXXXXXXXXX]
lxtphy0 at bm0 phy 0: LXT970 10/100 PHY, rev. 3
ohci0 at pci1 dev 6 function 0 vendor 0x1045 product 0xc861 rev 0x10: irq 28, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x1045 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
vgafb0 at pci0 dev 16 function 0 vendor 0x1002 product 0x5245 rev 0x00, mmio
wsdisplay0 at vgafb0: console (std, vt100 emulation)
uhub1 at uhub0 port 2
uhub1: Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0, rev 1.10/1.22, addr 2
uhub1: 3 ports with 2 removable, bus powered
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/1.22, addr 3, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1
uhidev1: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/1.22, addr 3, iclass 3/0
uhidev1: 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
bootpath: `/pci/@d/pci-ata@1/ata-4@0/disk@0/bsd`
boot device: wd0.
root on wd0a
rootdev=0x0 rrootdev=0xb00 rawdev=0xb02