Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2005-04-19 09:31:21
From: kefren
Description: Dell Latitude D505
NetBSD 3.99.3 (Kefren.LAPTOP) #25: Thu Apr 14 09:37:44 EEST 2005
root@mihai:/usr/src/sys/arch/i386/compile/Kefren.LAPTOP
total memory = 510 MB
avail memory = 493 MB
BIOS32 rev. 0 found at 0xffe90
PCI BIOS rev. 2.1 found at 0xfc96e
pcibios: config mechanism [1][x], special cycles [x][x], last bus 1
PCI IRQ Routing Table rev. 1.0 found at 0xfc590, size 176 bytes (9 entries)
PCI Interrupt Router at 000:31:0 (Intel 82371MX (MPIIX) Mobile PCI I/O IDE Xcelerator compatible)
------------------------------------------
device vendor product pin PIRQ IRQ stage
------------------------------------------
000:02:0 0x8086 0x3582 A 0x00 11 0 already assigned
000:29:0 0x8086 0x24c2 A 0x00 11 0 already assigned
000:29:1 0x8086 0x24c4 B 0x03 11 0 already assigned
000:29:2 0x8086 0x24c7 C 0x02 11 0 already assigned
000:29:7 0x8086 0x24cd D 0x07 11 0 already assigned
000:31:1 0x8086 0x24ca A 0x02 11 0 fixed up
000:31:5 0x8086 0x24c5 B 0x01 11 0 already assigned
000:31:6 0x8086 0x24c6 B 0x01 11 0 already assigned
001:01:0 0x104c 0xac44 A 0x00 11 0 already assigned
001:01:1 0x104c 0x8029 B 0x03 11 0 already assigned
001:03:0 0x8086 0x4220 A 0x01 11 0 already assigned
001:08:0 0x8086 0x103d A 0x04 11 0 already assigned
------------------------------------------
PCI fixup examining 8086:3580
PCI fixup examining 8086:3584
PCI fixup examining 8086:3585
PCI fixup examining 8086:3582
PCI fixup examining 8086:3582
PCI fixup examining 8086:24c2
PCI fixup examining 8086:24c4
PCI fixup examining 8086:24c7
PCI fixup examining 8086:24cd
PCI fixup examining 8086:2448
PCI fixup examining 104c:ac44
PCI bridge 1: primary 1, secondary 2, subordinate 2
PCI fixup examining 104c:8029
PCI fixup examining 8086:4220
PCI fixup examining 8086:103d
PCI bridge 0: primary 0, secondary 1, subordinate 2
PCI fixup examining 8086:24cc
PCI fixup examining 8086:24ca
PCI fixup examining 8086:24c5
PCI fixup examining 8086:24c6
PCI bus #2 is the last bus
[System BIOS Setting]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x8086 0x3580
[OK]
000:00:1 0x8086 0x3584
[OK]
000:00:3 0x8086 0x3585
[OK]
000:02:0 0x8086 0x3582
10h mem 0xf0000000 0x08000000
14h mem 0xfaf80000 0x00080000
18h port 0x0000c000 0x00000008
[OK]
000:02:1 0x8086 0x3582
10h mem 0xe8000000 0x08000000
14h mem 0xfaf00000 0x00080000
[OK]
000:29:0 0x8086 0x24c2
20h port 0x0000bf80 0x00000020
[OK]
000:29:1 0x8086 0x24c4
20h port 0x0000bf40 0x00000020
[OK]
000:29:2 0x8086 0x24c7
20h port 0x0000bf20 0x00000020
[OK]
000:29:7 0x8086 0x24cd
10h mem 0xfaeffc00 0x00000400
[OK]
000:30:0 0x8086 0x2448
[OK]
000:31:0 0x8086 0x24cc
[OK]
000:31:1 0x8086 0x24ca
10h port 0x000001f0 0x00000008
14h port 0x000003f4 0x00000004
18h port 0x00000170 0x00000008
1ch port 0x00000374 0x00000004
20h port 0x0000bfa0 0x00000010
24h mem 0x00000000 0x00000400
[NG]
000:31:5 0x8086 0x24c5
10h port 0x0000d800 0x00000100
14h port 0x0000dc40 0x00000040
18h mem 0xfaeff800 0x00000200
1ch mem 0xfaeff400 0x00000100
[OK]
000:31:6 0x8086 0x24c6
10h port 0x0000d400 0x00000100
14h port 0x0000d080 0x00000080
[OK]
001:01:0 0x104c 0xac44
10h mem 0x00000000 0x00001000
[NG]
001:01:1 0x104c 0x8029
10h mem 0xfcfff800 0x00000800
14h mem 0xfcff8000 0x00004000
[OK]
001:03:0 0x8086 0x4220
10h mem 0xfcffe000 0x00001000
[OK]
001:08:0 0x8086 0x103d
10h mem 0xfcffd000 0x00001000
14h port 0x0000ecc0 0x00000040
[OK]
--------------------------[ 2 devices bogus]
Physical memory end: 0x1fea6000
PCI memory mapped I/O space start: 0x1ff00000
[PCIBIOS fixup stage]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x8086 0x3580
[OK]
000:00:1 0x8086 0x3584
[OK]
000:00:3 0x8086 0x3585
[OK]
000:02:0 0x8086 0x3582
10h mem 0xf0000000 0x08000000
14h mem 0xfaf80000 0x00080000
18h port 0x0000c000 0x00000008
[OK]
000:02:1 0x8086 0x3582
10h mem 0xe8000000 0x08000000
14h mem 0xfaf00000 0x00080000
[OK]
000:29:0 0x8086 0x24c2
20h port 0x0000bf80 0x00000020
[OK]
000:29:1 0x8086 0x24c4
20h port 0x0000bf40 0x00000020
[OK]
000:29:2 0x8086 0x24c7
20h port 0x0000bf20 0x00000020
[OK]
000:29:7 0x8086 0x24cd
10h mem 0xfaeffc00 0x00000400
[OK]
000:30:0 0x8086 0x2448
[OK]
000:31:0 0x8086 0x24cc
[OK]
000:31:1 0x8086 0x24ca
10h port 0x000001f0 0x00000008
14h port 0x000003f4 0x00000004
18h port 0x00000170 0x00000008
1ch port 0x00000374 0x00000004
20h port 0x0000bfa0 0x00000010
24h mem 0x1ff00000 0x00000400
[OK]
000:31:5 0x8086 0x24c5
10h port 0x0000d800 0x00000100
14h port 0x0000dc40 0x00000040
18h mem 0xfaeff800 0x00000200
1ch mem 0xfaeff400 0x00000100
[OK]
000:31:6 0x8086 0x24c6
10h port 0x0000d400 0x00000100
14h port 0x0000d080 0x00000080
[OK]
001:01:0 0x104c 0xac44
10h mem 0x1ff01000 0x00001000
[OK]
001:01:1 0x104c 0x8029
10h mem 0xfcfff800 0x00000800
14h mem 0xfcff8000 0x00004000
[OK]
001:03:0 0x8086 0x4220
10h mem 0xfcffe000 0x00001000
[OK]
001:08:0 0x8086 0x103d
10h mem 0xfcffd000 0x00001000
14h port 0x0000ecc0 0x00000040
[OK]
--------------------------[ 0 devices bogus]
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium M (Dothan) (686-class), 1693.20 MHz, id 0x6d6
cpu0: features afe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR>
cpu0: features afe9f9bf<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features afe9f9bf<FXSR,SSE,SSE2,SS,TM,SBF>
cpu0: features2 180<EST,TM2>
cpu0: "Intel(R) Pentium(R) M processor 1.70GHz"
cpu0: using thermal monitor 2
cpu0: Enhanced SpeedStep running at 1700 MHz (1340 mV)
cpu0: Enhanced SpeedStep frequencies available (MHz): 1700 1400 1200 1000 800 600
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20040211
acpi0: X/RSDT: OemId <DELL , CPi R ,27d40903>, AslId <ASL ,00000061>
acpi0: SCI interrupting at int 9
ACPI Object Type `Processor` (0x0c) at acpi0 not configured
acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (PNP0C0A-1): ACPI Battery (Control Method)
acpibat1 at acpi0 (PNP0C0A-2): ACPI Battery (Control Method)
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (PNP0C0E): ACPI Sleep Button
PNP0C01 [System Board] at acpi0 not configured
PNP0A03 [PCI Bus] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
pckbc1 at acpi0 (PNP0F13): aux port
pckbc1: irq 12
pckbc2 at acpi0 (PNP0303): kbd port
pckbc2: io 0x60,0x64 irq 1
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43,0x50-0x53 irq 0
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61,0x63,0x65,0x67
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
PNP0C01 [System Board] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: using exception 16
com2 at acpi0 (PNP0501)
com2: io 0x3f8-0x3ff irq 4
com2: ns16550a, working fifo
com3 at acpi0 (SMCF010)
com3: io 0x2f8-0x2ff,0x280-0x287 irq 3 drq 3
com3: ns16550a, working fifo
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz0: passive cooling mode only
acpitz0: critical 101.0C
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi1: attached to attimer1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82855GM Host-Hub Controller (rev. 0x02)
agp0 at pchb0: detected 892k stolen memory
agp0: aperture at 0xf0000000, size 0x8000000
Intel 82855GM GMCH Memory Controller (miscellaneous system, revision 0x02) at pci0 dev 0function 1 not configured
Intel 82855GM GMCH Configuration Process (miscellaneous system, revision 0x02) at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0: Intel 82855GM GMCH Integrated Graphics Device (rev. 0x02)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
Intel 82855GM GMCH Integrated Graphics Device (miscellaneous display, revision 0x02) at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0: Intel 82801DB USB UHCI Controller (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801DB USB UHCI Controller (rev. 0x01)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801DB USB UHCI Controller (rev. 0x01)
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801DB USB EHCI Controller (rev. 0x01)
ehci0: interrupting at irq 11
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: single transaction translator
uhub3: 6 ports with 6 removable, self powered
ppb0 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x81)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
cbb0 at pci1 dev 1 function 0: Texas Instruments PCI4510 PCI-CardBus Bridge w/ IEEE 1394Host Controller (rev. 0x02)
fwohci0 at pci1 dev 1 function 1: Texas Instruments PCI4510 IEEE 1394 Host Controller w/PCI-CardBus Bridge (rev. 0x00)
fwohci0: interrupting at irq 11
fwohci0: OHCI 1.1, [_MAC_XXXXXXXXXX]:b4:30, 400Mb/s, 2048 max_rec, 4 ir_ctx, 8 it_ctx
iwi0 at pci1 dev 3 function 0: Intel PRO/Wireless LAN 2200BG Mini-PCI Adapter (rev. 0x05)
iwi0: interrupting at irq 11
iwi0: 802.11 address [_MAC_XXXXXXXXXX]
iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
fxp0 at pci1 dev 8 function 0: Intel PRO/100 VE (MOB) Network Controller, rev 129
fxp0: interrupting at irq 11
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: Intel 82801DB ISA Bridge (rev. 0x01)
ichlpcib0: TCO (watchdog) timer configured.
ichlpcib0: SpeedStep enabled
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801DBM IDE Controller (ICH4-M) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio
auich0: interrupting at irq 11
auich0: ac97: SigmaTel STAC9750/51 codec; headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D
auich0: ac97: ext id 605<AC97_22,AMAP,SPDIF,VRA>
Intel 82801DB AC97 Modem Controller (modem communications, revision 0x01) at pci0 dev 31function 6 not configured
isa0 at ichlpcib0
isapnp0 at isa0 port 0x279: ISA Plug `n Play device support
isapnp0: no ISA Plug `n Play devices found
WARNING: Callback scheduled before sysmon task queue thread present.
auich0: measured ac97 link rate at 48001 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
IPsec: Initialized Security Association Processing.
fw0 at fwohci0: [_MAC_XXXXXXXXXX]:[_MAC_XXXXXXXXXX]:f0:01:00:00
ubt0 at uhub0 port 2 configuration 1 interface 0
ubt0: Dell Dell BC02 Bluetooth USB Adapter, rev 2.00/12.66, addr 2
ubt0: has isoc data
bthci0 at ubt0
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
wd0 at atabus0 drive 0: <HTS548060M9AT00>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <PHILIPS CD-RW/DVD-ROM CDD5263, , UD91> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
lfs_mountfs: inode part of ifile of length 10493952 cannot fit in 2466560 bytes
lfs_mountfs: please consider increasing BUFPAGES to at least 10288
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
acpibat0: battery info: Panasonic, LION, DELL 4M010 , 5220