Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2005-04-20 03:47:53
From: globalc
Description: FreeBSD 5.4-STABLE, Sun v40z, 4way-opteron, 8GB ram
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.4-STABLE #0: Wed Apr 20 10:33:25 CEST 2005
    xxx@xxx.xxx:/usr/obj/usr/src/sys/SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 848 (2191.72-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0xf5a  Stepping = 10
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory  = 8589934592 (8192 MB)
avail memory = 7844429824 (7481 MB)
ACPI APIC Table: <PTLTD          APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
ioapic3 <Version 1.1> irqs 32-35 on motherboard
ioapic4 <Version 1.1> irqs 36-39 on motherboard
ioapic5 <Version 1.1> irqs 40-43 on motherboard
ioapic6 <Version 1.1> irqs 44-47 on motherboard
acpi0: <PTLTD    XSDT> on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
unknown: I/O range not supported
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf008-0xf00b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xf080-0xf0ff,0xf000-0xf07f,0xcf8-0xcff iomem 0xd8000-0xdbfff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 8111 UDMA133 controller> port 0x1000-0x100f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <bridge> at device 7.3 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xe5800000-0xe580ffff irq 25 at device 2.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: xx:xx:xx:xx:xx:xx
bge1: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xe5810000-0xe581ffff irq 26 at device 3.0 on pci2
miibus1: <MII bus> on bge1
brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge1: Ethernet address: xx:xx:xx:xx:xx:xx
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x2000-0x20ff mem 0xe5820000-0xe582ffff,0xe5830000-0xe583ffff irq 27 at device 4.0 on pci2
pci0: <base peripheral, interrupt controller> at device 10.1 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci0: <base peripheral, interrupt controller> at device 11.1 (no driver attached)
pcib4: <ACPI Host-PCI bridge> iomem 0xe5b07000-0xe5b07fff,0xe5b05000-0xe5b05fff,0xe5b03000-0xe5b03fff,0xe5b01000-0xe5b01fff on acpi0
pci32: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> mem 0xe5b00000-0xe5b00fff irq 32 at device 1.0 on pci32
pci33: <ACPI PCI bus> on pcib5
pci32: <base peripheral, interrupt controller> at device 1.1 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> mem 0xe5b02000-0xe5b02fff irq 36 at device 2.0 on pci32
pci37: <ACPI PCI bus> on pcib6
pci32: <base peripheral, interrupt controller> at device 2.1 (no driver attached)
pcib7: <ACPI PCI-PCI bridge> mem 0xe5b04000-0xe5b04fff irq 40 at device 3.0 on pci32
pci41: <ACPI PCI bus> on pcib7
pci32: <base peripheral, interrupt controller> at device 3.1 (no driver attached)
pcib8: <ACPI PCI-PCI bridge> mem 0xe5b06000-0xe5b06fff irq 44 at device 4.0 on pci32
pci45: <ACPI PCI bus> on pcib8
pci32: <base peripheral, interrupt controller> at device 4.1 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <ISA Option ROMs> at iomem 0xcb000-0xcefff,0xc9800-0xcafff,0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: DVDROM <DV-28E-C/1.4B> at ata1-master PIO4
Waiting 15 seconds for SCSI devices to settle
ses0 at mpt0 bus 0 target 6 lun 0
ses0: <SDR GEM318P 1> Fixed Processor SCSI-2 device 
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
da0 at mpt0 bus 0 target 0 lun 0
da0: <SEAGATE ST373307LC 0007> Fixed Direct Access SCSI-3 device 
da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
da1 at mpt0 bus 0 target 1 lun 0
da1: <SEAGATE ST373307LC 0007> Fixed Direct Access SCSI-3 device 
da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da1: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
Mounting root from ufs:/dev/da0s1a