Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2005-05-10 09:20:19
From: Trud
Description: noname i386, Pentium 233 MMX
NetBSD 1.6.2_STABLE (MYKERNEL4) #0: Fri Dec 17 10:01:14 CET 2004
    xxx@xxx.xxx:/usr/src/sys/arch/i386/compile/MYKERNEL4
cpu0: Intel Pentium/MMX (586-class), 233.88 MHz
cpu0: features 8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
cpu0: features 8001bf<MMX>
total memory = 65148 KB
avail memory = 57064 KB
using 839 buffers containing 3356 KB of memory
BIOS32 rev. 0 found at 0xfb4d0
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT82C597 (Apollo VP3) Host-PCI Bridge (rev. 0x02)
agp0 at pchb0: aperture at 0xe9000000, size 0xe400000
ppb0 at pci0 dev 1 function 0: VIA Technologies VT82C597 (Apollo VP3) CPU-AGP Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: S3 Trio3D/2X (rev. 0x02)
pci_mem_find: void region
pci_mem_find: void region
pci_mem_find: void region
pci_mem_find: void region
pci_mem_find: void region
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 7 function 0
pcib0: VIA Technologies VT82C586 (Apollo VP) PCI-ISA Bridge (rev. 0x41)
pciide0 at pci0 dev 7 function 1: VIA Technologies VT82C586 (Apollo VP) ATA33 controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <WDC AC21200H>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 1222 MB, 2484 cyl, 16 head, 63 sec, 512 bytes/sect x 2503872 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 1: <CD-532E-B, , 1.0A> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
wd1 at pciide0 channel 1 drive 0: <WDC AC22000L>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 1907 MB, 3876 cyl, 16 head, 63 sec, 512 bytes/sect x 3907008 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
pciide0: secondary channel interrupting at irq 15
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
cd0(pciide0:1:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
VIA Technologies VT82C586 (Apollo VP) Power Management Controller (miscellaneous bridge, revision 0x10) at pci0 dev 7 function 3 not configured
rtk0 at pci0 dev 8 function 0: RealTek 8139 10/100BaseTX
rtk0: interrupting at irq 11
rtk0: Ethernet address xx:xx:xx:xx:xx:xx
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rtk1 at pci0 dev 9 function 0: RealTek 8139 10/100BaseTX
rtk1: interrupting at irq 10
rtk1: Ethernet address xx:xx:xx:xx:xx:xx
ukphy1 at rtk1 phy 7: Generic IEEE 802.3u media interface
ukphy1: OUI 0x000000, model 0x0000, rev. 0
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rtk2 at pci0 dev 10 function 0: RealTek 8139 10/100BaseTX
rtk2: interrupting at irq 12
rtk2: Ethernet address xx:xx:xx:xx:xx:xx
ukphy2 at rtk2 phy 7: Generic IEEE 802.3u media interface
ukphy2: OUI 0x000000, model 0x0000, rev. 0
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug `n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: read port 0x203
ep0 at isapnp0 port 0x210/16 irq 5
ep0: 3Com 3C509B EtherLink III
ep0: address xx:xx:xx:xx:xx:xx, 8KB byte-wide FIFO, 5:3 Rx:Tx split
ep0: 10baseT, 10base2 (default 10baseT)
biomask e3c5 netmask ffe5 ttymask ffe7
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
IP Filter: v3.4.29 initialized.  Default = pass all, Logging = enabled
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)